Jonsered CC 2145 Technical Data, Technical data, FC 2145 S, FC 2145 W, Engine, Ignition system

Page 33

TECHNICAL DATA

Technical data

		BC 2145	FC 2145	FC 2145 S	FC 2145 W
	Engine
	Cylinder displacement, cu.in/cm3	2,75/45	2,75/45	2,62/43	2,62/43
	Cylinder bore, inch/mm	1,65/42	1,65/42	1,61/41	1,61/41
	Stroke, inch/mm	1,26/32	1,26/32	1,26/32	1,26/32
	Idle speed, rpm	2800	2800	2800	2800
	Recommended max. speed, rpm	12500	13500	13500	13500
	Speed of output shaft, rpm	9000	10500	10500	10500
	Max. engine output, acc. to ISO 8893, kW/ rpm	2,0/9000	2,0/9000	2,1/9600	2,1/9600
	Catalytic converter mufﬂer	Yes	No	Yes	Yes
	Speed-regulated ignition system	Yes	Yes	Yes	Yes
	Ignition system
	Manufacturer/type of ignition system	SEM AM	SEM AM	SEM AM	SEM AM
	Spark plug	Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y
	Electrode gap, inch/mm	0,02/0,5	0,02/0,5	0,02/0,5	0,02/0,5
	Fuel and lubrication system
	Manufacturer/type of carburetor	Zama C1Q	Zama C1Q	Zama C1Q	Zama C1Q
	Fuel tank capacity, US pint/litre	1,9/0,9	1,9/0,9	1,9/0,9	1,9/0,9
	Weight
	Weight without fuel, cutting attachment and	18,0/8,2	18,5/8,4	18,3/8,3	18,3/8,3
	guard, Lbs/kg	18,0/8,2	18,5/8,4	18,3/8,3	18,3/8,3
	guard, Lbs/kg
	Sound levels
	(see note 1)
	Equivalent sound pressure level at the user′s
	ear, measured according to ANSI B175.3-1997, 97/103		98/103	99/104	99/104
	dB(A), min/max:
	Vibration levels
	Vibration levels at handles, measured according
	to ANSI B175.3-1997, m/s2
	At idle, left/right handles, min.:	3,8/4,0	3,8/4,2	3,3/3,5	3,3/3,5
	At idle, left/right handles, max.:	3,8/4,0	3,8/4,2	3,3/3,5	3,3/3,5
	At max. speed, left/right handles, min.:	1,7/1,9	1,8/2,3	1,5/2,1	1,5/2,1
	At max. speed, left/right handles, max.:	2,1/2,2	2,4/2,5	1,7/2,7	1,7/2,7

Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various

working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment ﬁtted. The table indicates the highest and lowest values.

English – 33

Image 33

Contents Operator’s manual EPA Symbols KEY TO SYMBOLSContents CONTENTSNote the following before starting KEY TO SYMBOLSDear customer INTRODUCTIONWhat is what on the clearing saw? BC WHAT IS WHAT?What is what on the clearing saw? FC 2145, FC 2145 S, FC 2145 W Decompression valve FC 2145 S, FC 2145 W6 - English What is what on the clearing saw? CC Personal protective equipment GENERAL SAFETY PRECAUTIONSWARNING! Listen out for warning signals or WARNING! The ignition system of thisMachine′s safety equipment WARNING! Never use a machine with faultyA BA B Vibration damping system Cutting attachment guardQuick release MufﬂerLocking screw Locking nutWARNING! Mufﬂers ﬁtted with catalytic WARNING! The inside of the mufﬂer containWARNING! Using an incorrect cutting Cutting equipmentGeneral rules WARNING! Always stop the engine beforeTrimmer head Sharpening the saw bladeAssembling the handlebar and throttle FC 2145, FC 2145 S, FC 2145 W ASSEMBLYTransport position, handlebar Assembling the handlebar and throttle BC 2145, CCAssembling the cutting equipment L M C AWARNING! When ﬁtting the cutting N E F P BA CFitting the trimmer guard and trimmer head Trimmy SII Fitting the blade guard and saw bladeL M C A H P B CFitting other guards and cutting attachments Adjusting the harness and clearing sawStandard harness WARNING! When using a clearing saw it2 Grass clearing Vector harnessFUEL HANDLING Fuel safetyFuel WARNING! Take care when handling fuelWARNING! Taking the following precautions will lessen the risk of ﬁre FuelingWARNING! The catalytic converter mufﬂer Do not smoke or place hot objects near fuelCheck before starting STARTING AND STOPPINGStarting and stopping WARNING! The complete clutch cover andStarting WARNING! When the engine is started withStopping Heated handles FC 2145 WWORKING TECHNIQUES General working instructionsWARNING! Neither the operator of the WARNING! Watch out for thrown objects Working methodsWARNING! Sometimes branches or grass WARNING! Machines ﬁtted with saw bladesBrush cutting with a saw blade Grass clearing using a grass bladeClearing TrimmingCutting SweepingMAINTENANCE CarburetorWARNING! If the idle speed cannot be Setting procedure without a load Blade can be used Setting procedure with a load Trimmer head should be usedFC 2145, FC 2145 S, FC 2145 W Speed control at 13500 rpm Cooling system MufﬂerAir ﬁlter Proceed as followsDrive shaft Bevel gearSpark plug Cleaning the air ﬁlterTemperature 5C 41F or colder Winter useMaintenance Maintenance schedulemaintenance DailyTechnical data TECHNICAL DATAWeight FC 2145 SWeight Type Approved accessoriesCutting attachment guard, Art. no FC 2145, FC 2145 S, FC 2145 WYOUR WARRANTY RIGHTS AND OBLIGATIONS FEDERAL EMISSION CONTROL WARRANTY STATEMENTPoly Trim 6 Nm20mm 095-.130 Trimmy SII7,0 m ~ 3,5 mPage 1,1 Kw Auto1,1 Kw 2,7-3,3 mm10 m Tap n’Go 45 Spin10 cm 4,3 m 2,7-3,3 mm´z+Rvy¶5s¨ ´z+Rvy¶5s¨ Page 1150868-95 ´z+Rvy¶5s¨ ´z+Rvy¶5s¨