Jonsered CC 2145 manual General Safety Precautions, Personal protective equipment

Page 8
GENERAL SAFETY PRECAUTIONS

GENERAL SAFETY PRECAUTIONS

Important

IMPORTANT!

The machine is only designed for trimming grass, grass clearing and/or forestry clearing.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Never use a machine that has been modified in any way from its original specification.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers, guards and handles must be fitted before starting. Ensure that the spark plug cap and ignition lead are undamaged to avoid the risk of electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

WARNING! The ignition system of this

!machine produces an electromagnetic field during operation. This field may under some circumstances interfere with pacemakers.To reduce the risk of serious or fatal injury, we recommend persons with pacemakers to consult their physician and the pacemaker manufacturer before operating this machine.

WARNING! Running an engine in a confined

!or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.

Personal protective equipment

IMPORTANT!

A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

WARNING! Listen out for warning signals or

!shouts when you are wearing hearing protection. Always remove your hearing protection as soon as the engine stops.

HELMET

A helmet should be worn if the trees being cleared are taller than 2 m.

HEARING PROTECTION

Wear hearing protection that provides adequate noise reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective goggles must comply with standard ANSI Z87.1 in the USA or EN 166 in EU countries.

GLOVES

Gloves should be worn when necessary, e.g., when fitting cutting attachments.

BOOTS

Wear boots with steel toe-caps and non-slip sole.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants. Do not wear jewellery, shorts sandals or go barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

Always have a first aid kit nearby.

8 – English

Image 8
Contents Operator’s manual EPA KEY TO SYMBOLS SymbolsCONTENTS ContentsNote the following before starting KEY TO SYMBOLSINTRODUCTION Dear customerWHAT IS WHAT? What is what on the clearing saw? BC6 - English What is what on the clearing saw? FC 2145, FC 2145 S, FC 2145 WDecompression valve FC 2145 S, FC 2145 W What is what on the clearing saw? CC GENERAL SAFETY PRECAUTIONS Personal protective equipmentWARNING! Listen out for warning signals or WARNING! The ignition system of thisA BA B Machine′s safety equipmentWARNING! Never use a machine with faulty Cutting attachment guard Vibration damping systemQuick release MufflerLocking nut Locking screwWARNING! Mufflers fitted with catalytic WARNING! The inside of the muffler containCutting equipment WARNING! Using an incorrect cuttingGeneral rules WARNING! Always stop the engine beforeSharpening the saw blade Trimmer headASSEMBLY Assembling the handlebar and throttle FC 2145, FC 2145 S, FC 2145 WTransport position, handlebar Assembling the handlebar and throttle BC 2145, CCL M C A Assembling the cutting equipmentWARNING! When fitting the cutting N E F P BA CFitting the blade guard and saw blade Fitting the trimmer guard and trimmer head Trimmy SIIL M C A H P B CAdjusting the harness and clearing saw Fitting other guards and cutting attachmentsStandard harness WARNING! When using a clearing saw itVector harness 2 Grass clearingFuel safety FUEL HANDLINGFuel WARNING! Take care when handling fuelFueling WARNING! Taking the following precautions will lessen the risk of fireWARNING! The catalytic converter muffler Do not smoke or place hot objects near fuelSTARTING AND STOPPING Check before startingStarting and stopping WARNING! The complete clutch cover andWARNING! When the engine is started with StartingStopping Heated handles FC 2145 WWARNING! Neither the operator of the WORKING TECHNIQUESGeneral working instructions Working methods WARNING! Watch out for thrown objectsWARNING! Sometimes branches or grass WARNING! Machines fitted with saw bladesGrass clearing using a grass blade Brush cutting with a saw bladeTrimming ClearingCutting SweepingWARNING! If the idle speed cannot be MAINTENANCECarburetor FC 2145, FC 2145 S, FC 2145 W Speed control at 13500 rpm Setting procedure without a load Blade can be usedSetting procedure with a load Trimmer head should be used Muffler Cooling systemAir filter Proceed as followsBevel gear Drive shaftSpark plug Cleaning the air filterWinter use Temperature 5C 41F or colderMaintenance schedule Maintenancemaintenance DailyTECHNICAL DATA Technical dataWeight FC 2145 STECHNICAL DATA Approved accessories TypeCutting attachment guard, Art. no FC 2145, FC 2145 S, FC 2145 WFEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS20mm Poly Trim6 Nm Trimmy SII 095-.1307,0 m ~ 3,5 mPage Auto 1,1 Kw1,1 Kw 2,7-3,3 mmTap n’Go 45 Spin 10 m10 cm 4,3 m 2,7-3,3 mm´z+Rvy¶5s¨ ´z+Rvy¶5s¨ Page 1150868-95 ´z+Rvy¶5s¨ ´z+Rvy¶5s¨