ST VERSION DESCRIPTION | ENG | |
|
|
|
13.5SERIAL PORTS
Falcon 15 features up to four optoinsulated RS232 serial ports (port 3 and 4 are available as an option) which allow the remote control and RDS programming both through local - or remote PCs, UECP programmer, etc.
In particular, these connectors are for a local bidirectional computer connection when the BSN - Remote Control software is loaded onto a local computer. Connect a standard serial cable (not crossed) between the
The ports can be separately enabled / disabled via the menu. UECP protocol allows the user to assign different properties, data speed, acces to commands, etc to every port (see par. 12.6.1).
The four serial ports support Tx and Rx signals only. One serial cable comes with the unit.
13.6ANALOG AUDIO OUTPUT (Male XLR)
Balanced
The stereo analog outputs are designed for standard 0 dBu (line- level) balanced signals. Output level setting is done using the software parameter settings (see par. 14.3).
XLR pinout:
Pin 1 | Gnd |
Pin 2 | Signal |
Pin 3 | Return |
In case of unbalanced connections, please connect the cold pole (Pin 3) to the ground (Pin 1).
The impedance is set to 600Ohm (electronically balanced).
Page 38