IN / OUT SETTINGS (ST version) | ENG | |
|
|
|
14.3.4 MONO - STEREO OPERATION
The Audio Module Setup / Process Mode menu selects the mono versus stereo operation of the audio output.
In particular:
-Selecting Mono (Left) the Left input channel only will be processed and output on both the L and R outputs.
-Selecting Mono (Left+Right) the sum of the left and right audio inputs will be processed and output on both the L and R outputs.
14.3.5NOISE GATE SETTING (Noise Gate)
The Audio Module Setup / Noise Gate function allows you to avoid the effects of background noises while the input signal presents a lack of high frequencies. The parameter to be set is the Noise Gate Threshold, which determines the threshold value below which the dynamic
The Noise Gate Threshold: This may be adjusted within a range of
The Noise Gate function can be turned off if necessary by turning the shuttle
Page 47