Snapper LT23460AWS Correctly, Cut level, Mower blades will not, Rotate, Speed control pedal is

Page 41

 

 

Troubleshooting Chart Continued

 

 

Problem

Correction

 

 

 

 

1.

Stop the engine. Clean the mower deck.

 

2.

Raise the height of cut.

The grass does not discharge

3.

Replace or sharpen the blade(s).

correctly.

4

Use a slower ground speed.

 

5.

Move the throttle control to the FAST position.

 

6.

Replace the spring for the blade idler.

 

 

 

The mower housing does not

1.

Check the air pressure in the tires.

2.

Adjust the level of the mower deck.

cut level.

3.

Check the front axle. If the front axle does not freely pivot, loosen the axle bolt(s).

 

 

 

 

The mower blades will not

1.

Check the mower drive belt(s). Make sure the belt(s) are installed correctly.

rotate.

2.

Replace the mower drive belt(s).

 

 

 

The unit will not move when

1.

Release the automatic drive disconnect.

the brake is released and the

2.

Check the motion drive belt. Make sure the belt is installed correctly.

speed control pedal is

3.

Replace the motion drive belt.

depressed.

 

 

 

 

 

The unit moves slower or

1.

Check the motion drive belt. Make sure the belt is installed correctly.

2.

Replace the motion drive belt.

stops when the speed control

 

 

pedal is depressed.

 

 

 

 

 

When the brake pedal is

1.

Temporary belt noise does not change the operation of the unit. If belt noise is

released, belt noise can be

 

continuous, check the routing of the belt. Make sure the belt is inside all belt guides.

heard.

 

 

 

 

 

The rear wheels spin over

1.

Check the front axle. If the front axle does not freely pivot, loosen the axle bolt(s).

uneven terrain.

 

 

English

en

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Manual No Rev. ‘-’, 2/18/2009 Lawn Tractor SeriesDate Purchased Where to Find Us MowerEngine Table of Contents Protection against Tipovers Protection for ChildrenPreparation Do not allow pre-teenage children to operate machineOperation Safe Handling of GasolineTowing Ghij International PictorialsParts Bag Contents AssemblyAssembling the Steering Wheel Installing the SeatHow to Install the Battery Cables Maintenance Free BatteryHow To Check The Safety Interlock Switches Remove the protective cap from the battery terminalIMPORTANT! Before You Start Mowing Operator Presence System SeatCheck the Level of the Mower Deck How to Prepare the EngineCheck the Tires Features and Controls How to Use the Throttle Control Using ControlsOperation AttachmentsDriving and Stopping the Unit How to Engage the BladesHow to Use the Speed Control Pedal How to Drive in Reverse How to Use the Cruise ControlHow to Change Direction How to Disconnect the TransmissionHow to Stop the Unit How to Set the Parking BrakeHow to Change the Cutting Height How to Operate the Mower Deck How to Transport the UnitRemove the key to restrict access to the RMO feature MowingHow to Stop on a Hill How to Operate the Unit on HillsHow to Start Operation on a Hill All-Wheel SteeringEngine Operation How to Start the EngineBefore Starting the Engine Check the Oil Add GasolineOperating Tips TipsMowing and Bagging Tips Use the left side of the mower deck to trim near an objectMaintenance Schedule MaintenanceFrequency Maintenance Required Comments Maintenance engine Examine bladesHow to Remove and Install the Blade How to Check the MufflerGeneral Recommendations InspectionHow to Sharpen the Blade Install the mower deck. See How To Install The Mower DeckBlade Brake Check AdjustmentsHow to Check and Adjust the PTO Clutch Remove the 1/4 inch 6 mm pin or bolt Figure How to Check and Adjust the Motion Drive BeltAdjusting drive brake Drive brake Gearbox Hex nut How to Check and Adjust the Drive BrakeLift the battery tray and the battery out of the unit How to Remove the BatteryHow to Clean the Battery How to Charge the BatteryLubrication Where to LubricateHow to Check the Fuel Filter Mower Deck MaintenanceHow to Remove the Mower Deck How to Install the Mower DeckHanger rod Q Adjuster arm How to Level the Mower Deck How to Adjust the Gauge WheelsAxle bolts for the gauge wheels were mounted Remove the gauge wheels FigureReplacing the Motion Drive Belt Loosening adjuster knobs Lift link Adjuster knobsRemove the primary mower drive belt from the stack pulley How to Replace the Primary Mower Drive BeltHow to Replace the Secondary Mower Drive Belt English Rear wheel assembly Valve stem How to Install the WheelsRemove the bolt or pin used in step Wheel AlignmentHow to Replace the Light Bulb How to Replace the FuseHow to Clean the Mower Deck Raise the tractor hoodStorage over 30 days Troubleshooting Chart TroubleshootingCorrectly Pedal is depressed When the brake pedal isCut level Mower blades will notProduct Specifications SpecificationsEnglish Page English Page Year Limited Warranty Snapper Products Macon Street McDonough, GA

LT23460AWS specifications

The Snapper LT23460AWS is a versatile riding lawn mower designed for homeowners seeking efficiency, comfort, and ease of use in maintaining their lawns. This model comes equipped with several innovative features and technologies that enhance its performance and user experience.

One of the standout characteristics of the LT23460AWS is its powerful 23 horsepower Briggs & Stratton engine. This engine provides ample power to tackle various terrains, ensuring a smooth and efficient mowing experience. The mower operates on a hydrostatic transmission system, allowing users to easily adjust the speed and direction without the need for manual shifting, making it ideal for navigating around obstacles with ease.

The Snapper LT23460AWS features a 60-inch cutting deck, which allows for wide coverage in fewer passes, reducing the time spent mowing. This cutting deck is equipped with a robust cutting system, designed to deliver a clean, precise cut, whether tackling tall grass or maintaining a manicured lawn. Additionally, the deck height can be easily adjusted to suit different grass lengths, providing flexibility in lawn care.

Comfort is a key aspect of the LT23460AWS. The mower is designed with a spacious, ergonomic seat that provides ample cushioning, allowing for hours of comfortable mowing. Its easy-to-reach controls are strategically placed, enhancing user convenience and minimizing fatigue. The steering wheel is designed for optimal maneuverability, making it easier to navigate tight corners and complex landscaping.

Another notable technology in the Snapper LT23460AWS is the Advanced Air Management System. This technology optimizes airflow within the cutting deck, ensuring even grass distribution and improving overall cut quality. Moreover, the mower includes a mulching capability, allowing homeowners to cut grass into fine pieces that can enrich the lawn when returned to the soil.

The LT23460AWS is also designed with durability in mind. Its robust construction features high-quality materials that can withstand the rigors of regular mowing. This commitment to durability ensures that the Snapper LT23460AWS will provide reliable performance season after season.

In summary, the Snapper LT23460AWS is a powerful and efficient riding mower that combines advanced technology with user-friendly design. With its powerful engine, hydrostatic transmission, and comfortable seating, this mower is poised to meet the diverse needs of homeowners while delivering high-quality lawn care results.
Top Page Image Contents