Snapper 150Z Series manual Operation, Control Functions, Ground Speed Levers, Parking Brake Lever

Page 10

OPERATION

Ground Speed Levers -

Ground Speed Levers -

DRIVE Positons

START/PARK Positons

Left

Ground Speed

Control Lever

Right

Ground Speed

Control Lever

Mower

Cutting

Height

 

Parking

 

Brake

 

Lever

Parking Brake Lever -

Parking Brake Lever -

ENGAGE Positon

DISENGAGE Positon

 

Fuel Tank

 

Cap

CONTROL FUNCTIONS

Switch

Choke

(Closed)

Choke (Open)

Engine

Speed

(Fast)

Engine

RUN Speed

OFF START (Slow)

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks please read the entire section.

Transmission

Mower Blade

Release Levers

Switch

 

Ignition

Switch

Figure 1. Controls

Ground Speed Levers

These levers control the ground speed of the rider. The left lever controls the left rear drive wheel and the right lever controls the right rear drive wheel.

Pushing the levers out to the side, away from the operator’s lap (top inset, Figure 1), is the proper position for starting the rider. Pulling the levers in across the operator’s lap puts the levers in DRIVE positions.

From DRIVE position, moving a lever forward increases the FORWARD speed of the associated wheel. Pulling back on a lever increases the REVERSE speed. The further a lever is pushed, the faster the drive wheel will turn.

See DRIVING PRACTICE for steering instructions.

Parking Brake Lever

Move the parking brake lever (bottom inset, Figure 1) up and across and into the locking notch to engage and lock the parking brake. Move the parking brake lever across and down to disengage the parking brake. The engine will not start unless the parking brake is engaged.

Note: The parking brake must be disengaged before operating the ground speed levers.

Engine Speed Control

The engine speed control adjusts engine speed. Always set the engine speed to FAST for driving and mowing. Move the engine speed control back to SLOW to decrease engine speed. NEVER turn on the mower blades with the engine speed set to SLOW. Only turn on the mower blades with the engine speed set to FAST.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual 18.5, 21, 24, 26HP Zero-Turn RidersPage Table of Contents Safety Rules General OperationIgnition System Suggested Guide for Sighting Slopes for Safe Operation Service & Maintenance Safe Handling of GasolineSafety & Operation Decals Decal Amputation Thrown Objects Hazard DecksIdentification Numbers ID TagGround Speed Levers OperationControl Functions Parking Brake LeverGeneral Operating Safety Checks Before Starting Fuel RecommendationsStarting the Engine Emergency StoppingStopping the Rider & Engine Pushing the Rider by HandForward Travel Practice Driving PracticeSmooth Travel Reverse Travel PracticeExecuting Turns Practice Turning Around a CornerPractice Turning In Place Executing an End-Of-Row Zero TurnInstalling the Mower Deck Removing the Mower DeckMower Deck Removal & Installation 42 & 50 Decks Rider MAINTENANCE, All Models MaintenanceMaintenance Schedule 18.5, 21HP Briggs & StrattonClean Debris from Engine Cooling Areas and AIR Filter Accessing the Engine CompartmentClean Debris from Rider Engine Compartment Check Tire PressureGrease LubricationOil Lubricating Mower Lift Clean Deck Check / Replace Mower Blades Blade Removal 33 DeckPage Check Rider Safety System Clean the Battery and CablesOperational Safety Checks Check / Adjust PTO Clutch Adjust PTO Clutch Window Adjustment Nut Feeler GaugeChange Engine OIL Check Engine OIL LevelChange Engine OIL & Filter Service AIR Filter & PRE-CLEANER 18.5 & 21 HP Engines Air Filter Removal & InstallationService AIR Filter 24 & 26HP Engines Air Filter Cover Air Filter Cover ScrewsAir Filter Service Pre-Cleaner Clean Combustion Chamber Briggs & Stratton ModelsPre-Cleaner Service Replace Spark PlugSpeed Balancing Adjustment Service & AdjustmentsGround Speed Control Lever Adjustment Cutting Height AdjustmentEngine Adjustments Brake AdjustmentBattery Charging 62cmMower Deck Leveling Adjustments Side to Side Leveling 33 DecksSide to Side Leveling 42 & 50 Decks Front To Back Leveling 33 Deck Orient Blades Front-to-BackFront To Back Leveling 42 & 50 Decks DeckMower Drive Belt Replacement 33 Decks Mower Belt ReplacementMower Drive Belt Replacement 42 Decks Storage StorageTroubleshooting Troubleshooting the RiderTroubleshooting the Mower Specifications Service Items Replacement PartsAerate HOW and When toWATER, Fertilize HOW High to MOW the GrassWhen and HOW Often to MOW Proper Mowing Speed

150Z Series specifications

The Snapper 150Z Series is a remarkable line of zero-turn mowers designed for both residential and commercial lawn care enthusiasts. Engineered for superior performance, this series combines durability, efficiency, and ease of use, making it a top choice for those who demand quality in their mowing equipment.

One of the standout features of the Snapper 150Z Series is its powerful engine options. The mowers are equipped with reliable Briggs & Stratton or Kohler engines, known for their robustness and fuel efficiency. This ensures that users can tackle even the most challenging mowing tasks with confidence, saving both time and fuel in the process.

A key characteristic of the Snapper 150Z Series is its unique zero-turn capability, which provides unmatched maneuverability. With a tight turning radius, these mowers can easily navigate around trees, flower beds, and other obstacles. This feature not only enhances the mowing experience but also helps achieve a precisely manicured lawn in less time compared to traditional lawn tractors.

The cutting deck is another notable element of the 150Z Series. Designed with a reinforced steel construction, it is built to withstand the rigors of lawn care while providing a clean and consistent cut. The mowers are available with various deck sizes, typically ranging from 42 to 50 inches, allowing users to choose a model that best fits their yard size and mowing needs. Additionally, the adjustable cutting height offers versatility, making it easy to customize the cut for different grass types and seasonal conditions.

Comfort and ergonomics are prioritized in the Snapper 150Z design. These mowers feature a plush, padded seat with armrests, allowing for extended periods of comfortable operation. The intuitive controls are designed for ease of use, making it accessible for both novice and experienced users alike.

Furthermore, the Snapper 150Z Series incorporates advanced technologies such as a dashboard display that provides essential information at a glance, from engine performance to maintenance reminders. This integration of technology enhances the overall user experience and promotes proactive maintenance.

In summary, the Snapper 150Z Series offers a perfect blend of power, precision, and comfort. With its robust engine options, zero-turn capabilities, durable cutting deck, and user-friendly design, it stands out as a reliable choice for anyone looking to elevate their lawn care game. Whether for residential or commercial use, the Snapper 150Z Series is engineered to deliver superior results with every mow.
Top Page Image Contents