Esoteric X-05 owner manual Analog audio output terminals, Digital audio output terminals

Page 7

AAnalog audio output terminals

Use either the XLR or RCA (pin) terminals for 2-channel analog stereo output.

Use commercially available XLR or RCA audio cables: XLR: Use a balanced XLR digital cable

RCA: Use an RCA audio cable

Connect the R terminal on this unit to the right (R) terminal of the amplifier and the L terminal on this unit to the left (L) terminal of the amplifier.

<i.LINK audio connector is available in the future as a chargeable option. If you have added this connector then only the sound of the front L/R over 5.1 channels is output from an analog audio output terminal if you set the analog output mode to “Multi ch”. If you only use the analog audio output terminals, normally set the multi-channel mode to “2ch”.

BDigital audio output terminals

Digital audio from CD is output from these terminals.

The unit may be connected using either coaxial or optical (TOS) cables to amplifiers or digital audio devices such as CD recorders, etc.

Use commercially available COAXIAL or OPTICAL cables: COAXIAL: Use RCA (pin) digital audio cable OPTICAL: Use optical digital audio cable (TOS)

<The DIGITAL OUT terminals cannot output the digital audio from Super Audio CDs. Note: For 2 channel SACD audio output use the analog audio outputs (RCA or XLR connection outputs).

<The optical terminal is covered by a shutter. Make sure that the cable is firmly inserted, but do not force the cable when connecting it or removing it, in order not to cause damage to the unit.

CRESERVED (slot for i.LINK) terminals

The i.LINK (AUDIO) terminals will become available after a future hardware upgrade (chargeable and optional upgrade).

i.LINK (AUDIO): 6pin x 1

i.LINK (AUDIO): 4pin x 1

In addition to digital audio from CD, the digital surround audio channels from Super Audio CDs can be output from the i.LINK (AUDIO) terminals.

If you have had this optional upgrade installed, use a commercially available S400 compatible i.LINK (IEEE1394) cable (6 pin or 4 pin). To enjoy surround sound from a Super Audio CD, connect the i.LINK (AUDIO) terminal to a suitably equipped amplifier such as AZ-1, AI-10 (upgraded, charged), or D/A converter such as D-01 etc.

For multi-channel audio output, press the 2CH/MULTI button on the remote control to select “Multi ch”. (page 17)

ENGLISH

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Super Audio CD Player Important Safety Instructions Contents Read this before operation Restoring factory default settingsBefore Use What’s in the boxType of discs that can be played on this system DiscsFollowing discs cannot be played with this unit Digital Coaxial ConnectionLine Digital audio output terminals Analog audio output terminalsReserved slot for i.LINK terminals Master clock generator AI-10, G-0s, G25U, AZ-1, etc Word sync connectorSignal GND connection Power cord receptacleFront panel features Main unit Front panel display Understanding the remote control unit How to insert the batteries Remote Control UnitPlayback Selecting the playback area Pausing playbackStopping playback Opening and closing the trayTrack repeat Repeat modeSelecting a track Skipping playbackDisplay dimming Changing the display modeOFF Available menu item and options SettingsDF digital filter Link 2ch/Multi chPCM Data transfer rate How to connect multiple i.LINK-capable devicesLink Ieee Copyright protection system DtcpTroubleshooting Specifications Sommaire Rétablissement des réglages usine par défaut Avant utilisationContenu de l’emballage Lisez ceci avant utilisationPropos des CD-R/CD-RW DisquesTypes de disques lisibles par ce système CD audioEntrée audio Line Amplificateur stéréo AI-10 etc ConnexionsPrises de sortie audio analogique 2 canaux Emplacement réservé aux prises i.LINK AudioPrises de sortie audio numérique Prise secteur Bornier Signal GND masse du signalConnecteur de synchronisation Word Clock Embase de cordon d’alimentationOPEN/CLOSE OUVRIR/FERMER Caractéristiques de la face avantPlay Lecture Afficheur de la face avant Touches numériques Emploi de la télécommandeTouches pour DVD Lecture TélécommandeComment insérer les piles Sélection de la zone de lecture Pause de la lectureArrêt de la lecture Ouverture et fermeture du tiroirPlage en boucle Lecture en boucle RepeatSélection d’une plage Saut de lectureAtténuation de l’afficheur Changement du mode d’affichageParamètres de menu et options disponibles RéglagesMulti ch nécessite la mise à niveau optionnelle i.LINK Réglage de sortie i.LINKConnexion en guirlande Système de protection de droits d’auteurTaux de transfert des données Comment connecter plusieurs appareils compatibles i.LINKPrise i.LINK Audio Guide de dépannageGénéralités Synchronisation word clockCaractéristiques Français Teac Esoteric Company
Top Page Image Contents