(i.LINK)
If you have optionally upgraded to add the i.LINK connection, then the i.LINK terminal becomes operational.
When the i.LINK (AUDIO) terminal is connected to an amplifier or a D/A converter, select a proper i.LINK output setting.
When using the i.LINK terminal, select “60958” or “PCM”.
60958
DSD signal is output during playback of a Super Audio CD. The digital signal in IEC60958 (DSD) format is output during playback of a CD.
PCM
DSD signal is output during playback of a Super Audio CD. Linear PCM digital signal is output during playback of a standard CD.
<Some amplifiers may display this signal as
OFF
Select this setting when you don’t use the i.LINK (AUDIO) terminal.
With this setting no signal is output from the i.LINK (AUDIO) terminal.
<There is no difference between 60958 mode and PCM mode as far as Super Audio CD playback is concerned.
<If you experience any problem with the audio output, read the instructions of the connected component to check settings for adaptable formats.
<If the component connected via the i.LINK terminal is compatible with flow rate control, the connected component will work in the flow rate control mode. Flow rate control is an Esoteric technology that maximizes signal transfer rate between i.LINK devices.
2ch/Multi ch
Press to select 2ch
If you have optionally upgraded to add the i.LINK connection, then this button described above will become operational.
2ch | ENGLISH |
| |
This mode outputs |
|
During playback of |
|
the |
|
right channels). |
|
Multi ch (Requires the optional i.LINK upgrade) |
|
During playback of |
|
this selection passes |
|
i.LINK connection. |
|
The “MULTI” indicator lights when “Multi ch” is selected. |
|
17