Cub Cadet 7252 Transmission Hi/Lo Range Shift Lever, Cup Holder, Hand Holds, Amber Hazard Lights

Page 14

E. Transmission Hi/Lo Range Shift Lever

The Hi/Lo range shift lever is located on the right fender. The lever has two speed range settings and a neutral position. The lever must be shifted into either the high or low range prior to depressing the forward/reverse pedal to drive the tractor.

•Push the lever forward to shift into the high range.

•Push the lever rearward to shift into the low range.

•Move the lever to the center position to shift into the neutral position.

WARNING: Never attempt to shift the range lever when the tractor is in motion.

F. Cup Holder

The cup holder is located on the right fender.

G. Hand Holds

Hand holds are built into both the left and right hand fender covers. The handles can be used to assist in mounting and dismounting the tractor.

H. Amber Hazard Lights

The hazard lights are located on each side of the ROPS bar. The lights illuminate in a flashing mode when the hazard light switch is turned on. Always use the hazard lights when it is necessary to warn others that the tractor is being operated in the area.

J. Tail Lights

The tail lights illuminate when the ignition switch is in the ON position and the headlight switch is turned on.

K. Reverse Lights

The reverse lights illuminate when the tractor is being operated in the reverse direction.

L. Storage Tray

The storage tray is located behind the seat. Use the tray to carry small loose articles while operating the tractor.

M. ROPS (Rollover Protective Structure)

ROPS is installed to prevent or reduce injuries to the operator should the tractor accidentally overturn. The effectiveness of the ROPS is minimized if the seat belt is not used.

N. Seat Belt

The seat belt, properly adjusted and used in conjunction with the Rollover Protective Structure (ROPS), can greatly reduce the risk of serious injury or death to the operator if an accidental tractor overturn occurs.

WARNING: DO NOT use the seat belt if the ROPS structure has been removed from the tractor.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Important Read Safety Rules and Instructions Carefully Operator’s ManualTo the Owner Table of ContentsCalling Service Information Rops Information Plate Recording Model and Serial Number InformationTractor Model Plate Important Safe Operation Practices General OperationOperating the PTO Slope OperationChildren Do notSafety Frame Rops ServiceFAN Warning Label Located on Each Side of Radiator Safety LabelsStarting AID Keep HandsRoll Over Warning Label Located on RIGHT/REAR Fender Battery Warning Label Located Under HoodPTO Warning Label Located on Rear PTO Shield Controls and Features Floorboard and Dash Panel Mounted ControlsSeat Adjustment Lever PTO SwitchIgnition Switch Steering WheelDifferential Lock Pedal Hazard Light SwitchHeadlight Switch Parking Brake LeverParking Brake Indicator Light Battery Indicator LightEngine Coolant Temperature Light PTO Indicator LightFuel Fill Cap Fender Mounted Conrtols and FeaturesPTO Reverse Override Switch PTO Selection LeverHand Holds Transmission Hi/Lo Range Shift LeverCup Holder Amber Hazard LightsRollover Protective Structure Rops Safety Interlock SystemOperation Fueling the TractorStarting the Engine NEW Tractor BREAK-IN ProceduresThrottle Handle Slow Fast PTO Switch ‘OFF’ Position Cold Weather StartingDriving the Tractor Using Jumper Cables to Start the EngineStopping the Engine Driving on SlopesStopping the Tractor Using the FORWARD/REVERSE PedalUsing the HI/LO Range Shift Lever Hydraulic Lift Lever Using the Differential Lock PedalUsing the Hydraulic Lift Lever Using the PTO Selection Lever Engaging the PTOUsing the Three Point Hitch Using the PTO Reverse Override SwitchUsing the Hitch Plate LightingWeighting the Rear of the Tractor Tractor WeightingFront Weights Rear Weight BoxAdjusting the Seat Belt AdjustmentsAdjusting the Seat Three Point Hitch AdjustmentsJAM NUT Adjusting Front Wheel TOE-INAdjustment Tube HEX Shaft HEX JAM NUTFeedback Links Rodhydraulic Lift Valve Adjusting the BrakesAdjusting Hydraulic Lift Feedback ROD General Information Tractor MaintenanceLubrication Table API11 5 Lubrication and Maintenance Chart Service Intervals Operation toAccessing the Engine Compartment General Battery InformationBattery Storage Battery RemovalBattery Maintenance Battery Holddown ROD Wing NUT Holddown Strap Cable ClampHazard Bulb Replacement Head Light Bulb ReplacementTail Light Bulb Replacement Notch Lenses Bulb Socket Screw Inner Notch Housing OuterServicing Electrical System Instrument Panel Bulb ReplacementAccessing the Fuse Center Instrument Panel FusesChecking TRANSMISSION/HYDRAULIC System OIL Level Main FuseHazard Light Flasher Relay Transmission Drain Plug Changing TRANSMISSION/HYDRAULIC System OILHydrostatic Hydraulic System OIL Filter Initial Break-In Period Filter Change Tire Inflation Chart Maintenance of the Rollover Protective Structure RopsTire Maintenance Lubrication of Drive ShaftRemoving the Tractor from Storage Front of EngineTractor Storage Engine Information and Maintenance Limited Liability Cleaning the Radiator Screen and Radiator Engine MaintenanceCleaning the Engine Before servicingHEX Drain Cock Engine Valve Adding Engine OILChanging the Engine OIL and Filter Full Mark OIL Filter Coolant ADD Mark ReservoirChecking Engine Coolant Level Remote Radiator CAP Filler Neck Overflow HoseChanging the Engine Coolant Changing the AIR CleanerInspection of Cooling System Hoses Overflow Reservoir Coolant Drain PlugServicing the Spark Plugs Servicing the Foam PrecleanerServicing the Paper Element Changing the Fuel FilterSpecifications Hydraulic Lift System Power Take-OffGeneral Dimensions BrakesModel Number Optional Equipment and AccessoriesDescription CUB Cadet LLC Post Office BOX CLEVELAND, Ohio

7252 specifications

The Cub Cadet 7252 is a noteworthy addition to the lineup of robust and reliable lawn tractors designed for residential homeowners and landscaping professionals alike. This model combines power, versatility, and advanced technology to deliver an exceptional mowing experience.

One of the standout features of the Cub Cadet 7252 is its powerful engine. It is equipped with a reliable, air-cooled Kohler engine, providing ample horsepower to tackle even the most demanding mowing tasks. This engine delivers smooth and consistent performance, ensuring that users can cut through thick grass and uneven terrain with ease. The hydrostatic transmission further enhances functionality by offering a seamless driving experience without the need for manual gear shifting.

The cutting deck of the Cub Cadet 7252 is another highlight. With a wide 50-inch cutting deck, it allows for efficient mowing over large areas, reducing the time spent on lawn maintenance. The deck features a reinforced steel construction for durability and longevity, capable of withstanding the rigors of regular use. Additionally, users can achieve different cutting heights with ease, thanks to the 12 position height adjustment feature, ranging from 1 to 4 inches.

Technologically, the 7252 model integrates innovative features for enhanced comfort and ease of use. The ergonomic high-back seat provides maximum support during extended mowing sessions, while the comprehensive dashboard displays essential information, such as fuel level and engine status, allowing for better operation management.

Furthermore, this lawn tractor is designed with user convenience in mind. It features a tight turning radius, which makes maneuvering around obstacles such as trees and flower beds incredibly easy. The Cub Cadet 7252 also offers optional attachments like baggers and snow blowers, making it a versatile tool for various seasonal tasks beyond lawn care.

Overall, the Cub Cadet 7252 is engineered for performance, comfort, and versatility. Combining a powerful engine, wide cutting deck, and innovative technologies, it serves as an excellent solution for homeowners looking to maintain their lawns efficiently while enjoying the convenience of modern machinery.
Top Page Image Contents