Cub Cadet 7252 manual Operation, Rollover Protective Structure Rops, Safety Interlock System

Page 15

SECTION 2: OPERATION

ROLLOVER PROTECTIVE STRUCTURE (ROPS)

This tractor is equipped with a Rollover Protection Structure (ROPS) and seat belts. When used together they are effective in reducing injuries to the operator in the event of an accidental tractor rollover. The safety provided by the ROPS is minimized if the seat belt is not properly adjusted AND buckled. Refer to ADJUSTMENTS for seat belt adjustment.

ROPS

Figure 13

WARNING: Always wear the seat belt when operating the tractor equipped with a ROPS. However, if the ROPS has been removed, the seat belt should not be used.

Use the following guidelines when using a tractor equipped with a ROPS:

•Be aware of overhead clearances in the area of operation. Check for clearance of door (or gate) openings and other overhead objects such as utility lines and tree branches. Overhead objects could catch the ROPS and upset the tractor.

•Do not modify the ROPS by drilling holes for, or welding accessories to the structure.

•Do not use the ROPS to pull objects with the tractor. Use ONLY the tractor drawbar for pulling.

•In the event of an accident, have the ROPS carefully inspected and, if necessary, replaced by your Cub Cadet dealer. Do not attempt to repair the ROPS.

SAFETY INTERLOCK SYSTEM

This tractor is equipped with a safety interlock system for the protection of the operator. If the interlock system should ever malfunction, do not operate the tractor. Contact your authorized Cub Cadet Dealer. The safety interlock system prevents the engine from cranking or starting unless the brake pedal is fully depressed, and the PTO is “OFF”.

•The safety interlock system will shut off the engine if the operator leaves the seat before engaging the parking brake.

•The safety interlock system will shut off the engine if the operator leaves the seat with the PTO “ON”, regardless of whether the brake lock is engaged.

NOTE: The PTO switch must be moved to the “OFF” position to restart the engine. If the reverse override function had been activated, it will remain activated until the ignition switch is turned to the "OFF" position.

•The safety interlock system will shut off the PTO if the reverse control pedal is depressed, unless the reverse override function is activated.

FUELING THE TRACTOR

Fill the fuel tank with only clean, fresh, unleaded regular grade gasoline with a minimum octane rating of 87. If engine knocking or pinging occurs, use a different source of gasoline or a higher octane rating.

Oxygenated Fuels. Some fuels, called oxygenated or reformulated gasoline, are gasoline blended with alcohols or ethers. Gasoline blended with either ethyl alcohol (Max. 10%) or methyl tertiary butyl ether (MTBE, Max. 15%) are approved as fuels for the engine, provided they meet the minimum octane rating requirement. Do not use gasoline which contains Methanol. If any undesirable operating symptoms occur, use gasoline with a lower percentage of alcohol or ether.

Purchase fuel in a quantity that can be used within 30 days to assure fuel freshness.

WARNING: Gasoline is extremely flammable and can be explosive in certain conditions. Do not fill the fuel tank when the engine is running or while the engine is hot. Tighten the fuel cap securely.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operator’s Manual Important Read Safety Rules and Instructions CarefullyTable of Contents Calling Service InformationTo the Owner Recording Model and Serial Number Information Tractor Model PlateRops Information Plate General Operation Important Safe Operation PracticesDo not Slope OperationChildren Operating the PTOService Safety Frame RopsKeep Hands Safety LabelsStarting AID FAN Warning Label Located on Each Side of RadiatorBattery Warning Label Located Under Hood PTO Warning Label Located on Rear PTO ShieldRoll Over Warning Label Located on RIGHT/REAR Fender Floorboard and Dash Panel Mounted Controls Controls and FeaturesSteering Wheel PTO SwitchIgnition Switch Seat Adjustment LeverParking Brake Lever Hazard Light SwitchHeadlight Switch Differential Lock PedalPTO Indicator Light Battery Indicator LightEngine Coolant Temperature Light Parking Brake Indicator LightPTO Selection Lever Fender Mounted Conrtols and FeaturesPTO Reverse Override Switch Fuel Fill CapAmber Hazard Lights Transmission Hi/Lo Range Shift LeverCup Holder Hand HoldsFueling the Tractor Safety Interlock SystemOperation Rollover Protective Structure RopsCold Weather Starting NEW Tractor BREAK-IN ProceduresThrottle Handle Slow Fast PTO Switch ‘OFF’ Position Starting the EngineDriving on Slopes Using Jumper Cables to Start the EngineStopping the Engine Driving the TractorUsing the FORWARD/REVERSE Pedal Using the HI/LO Range Shift LeverStopping the Tractor Using the Differential Lock Pedal Using the Hydraulic Lift LeverHydraulic Lift Lever Engaging the PTO Using the PTO Selection LeverLighting Using the PTO Reverse Override SwitchUsing the Hitch Plate Using the Three Point HitchRear Weight Box Tractor WeightingFront Weights Weighting the Rear of the TractorThree Point Hitch Adjustments AdjustmentsAdjusting the Seat Adjusting the Seat BeltHEX Shaft HEX JAM NUT Adjusting Front Wheel TOE-INAdjustment Tube JAM NUTAdjusting the Brakes Adjusting Hydraulic Lift Feedback RODFeedback Links Rodhydraulic Lift Valve API Tractor MaintenanceLubrication Table General Information11 5 Service Intervals Operation to Lubrication and Maintenance ChartGeneral Battery Information Accessing the Engine CompartmentBattery Holddown ROD Wing NUT Holddown Strap Cable Clamp Battery RemovalBattery Maintenance Battery StorageNotch Lenses Bulb Socket Screw Inner Notch Housing Outer Head Light Bulb ReplacementTail Light Bulb Replacement Hazard Bulb ReplacementInstrument Panel Fuses Instrument Panel Bulb ReplacementAccessing the Fuse Center Servicing Electrical SystemMain Fuse Hazard Light Flasher RelayChecking TRANSMISSION/HYDRAULIC System OIL Level Changing TRANSMISSION/HYDRAULIC System OIL Hydrostatic Hydraulic System OIL FilterTransmission Drain Plug Initial Break-In Period Filter Change Lubrication of Drive Shaft Maintenance of the Rollover Protective Structure RopsTire Maintenance Tire Inflation ChartFront of Engine Tractor StorageRemoving the Tractor from Storage Engine Information and Maintenance Limited Liability Before servicing Engine MaintenanceCleaning the Engine Cleaning the Radiator Screen and RadiatorFull Mark OIL Filter Coolant ADD Mark Reservoir Adding Engine OILChanging the Engine OIL and Filter HEX Drain Cock Engine ValveRemote Radiator CAP Filler Neck Overflow Hose Checking Engine Coolant LevelOverflow Reservoir Coolant Drain Plug Changing the AIR CleanerInspection of Cooling System Hoses Changing the Engine CoolantChanging the Fuel Filter Servicing the Foam PrecleanerServicing the Paper Element Servicing the Spark PlugsSpecifications Brakes Power Take-OffGeneral Dimensions Hydraulic Lift SystemOptional Equipment and Accessories DescriptionModel Number CLEVELAND, Ohio CUB Cadet LLC Post Office BOX

7252 specifications

The Cub Cadet 7252 is a noteworthy addition to the lineup of robust and reliable lawn tractors designed for residential homeowners and landscaping professionals alike. This model combines power, versatility, and advanced technology to deliver an exceptional mowing experience.

One of the standout features of the Cub Cadet 7252 is its powerful engine. It is equipped with a reliable, air-cooled Kohler engine, providing ample horsepower to tackle even the most demanding mowing tasks. This engine delivers smooth and consistent performance, ensuring that users can cut through thick grass and uneven terrain with ease. The hydrostatic transmission further enhances functionality by offering a seamless driving experience without the need for manual gear shifting.

The cutting deck of the Cub Cadet 7252 is another highlight. With a wide 50-inch cutting deck, it allows for efficient mowing over large areas, reducing the time spent on lawn maintenance. The deck features a reinforced steel construction for durability and longevity, capable of withstanding the rigors of regular use. Additionally, users can achieve different cutting heights with ease, thanks to the 12 position height adjustment feature, ranging from 1 to 4 inches.

Technologically, the 7252 model integrates innovative features for enhanced comfort and ease of use. The ergonomic high-back seat provides maximum support during extended mowing sessions, while the comprehensive dashboard displays essential information, such as fuel level and engine status, allowing for better operation management.

Furthermore, this lawn tractor is designed with user convenience in mind. It features a tight turning radius, which makes maneuvering around obstacles such as trees and flower beds incredibly easy. The Cub Cadet 7252 also offers optional attachments like baggers and snow blowers, making it a versatile tool for various seasonal tasks beyond lawn care.

Overall, the Cub Cadet 7252 is engineered for performance, comfort, and versatility. Combining a powerful engine, wide cutting deck, and innovative technologies, it serves as an excellent solution for homeowners looking to maintain their lawns efficiently while enjoying the convenience of modern machinery.
Top Page Image Contents