WORKING WITH DETERGENTS
Detergents can only be applied at low pressure setting (Mix).
ÎSTEP 1:
Install the Vario Power Spray Wand. Set the spray wand to the low pres- sure setting (Mix).
ÎSTEP 2:
Fill the Detergent Tank with the se- lected detergent.
ÎSTEP 3:
Adjust detergent metering regulator.
-Medium quantity: Central position
-Large quantity: "+" position
-Small quantity:
ÎSTEP 5:
Turn on the pressure washer (I). Pull trigger to operate unit. Liquid deter- gent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.
ÎSTEP 6:
Cleaning up: Always draw fresh wa- ter through the detergent tank or si- phon tube when done to flush any remaining detergents from the injec- tion system.
For best results see Cleaning Tips for specific information on how to clean different surfaces.
Always Use Kärcher® Detergent for
Best Results
Kärcher® biodegradable detergents are specially formulated to protect the envi- ronment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Kärcher® Detergents, check your retailer or visit our website: www.buykarcher.com
ÎSTEP 4:
To rinse, move the VPS out of „Mix“ position and pull trigger to operate unit.
CAUTION Never use:
– Bleach, Chlorine products and other corrosive chemicals
– Liquids containing solvents (i.e., paint thinners, gasoline, oils)
–
– Ammonia products
–
These chemicals will harm the unit and will damage the surface being cleaned.
Use of these items will void the war- ranty.
English 9