Craftsman 580.7523 Productspecifications, Ownersresponsibilities, Pressure Washer Specifications

PRODUCTSPECIFICATIONS

Pressure Washer Specifications

Pressure	3,800 PSi
Flow Rate	4.0 GPM
DetergentMix	Useas directed
Water Supply Temperature	Not to exceed IO0°F
Pump Oil Capacity	12 fl. oz. (0.35 I)

Engine Specifications

RatedHorsepower	13 at 3600 rpm
Bore	3.5 in. (88 ram)
Stroke	2.5 in. (64 ram)
Displacement	23.7 in. (389 cc)
Spark Plug
Resistor	NGK BPR6ES
Set GapTo:	0.028-0.031in (0.70-0.80
	ram)
IntakeValveClearance	0.15 _+0.02 mm (cold)
ExhaustValveClearance	0.20 _+0.02 mm (cold)
FuelCapacity	1.72 Gallons
OilType	SAE10W-30

This pressurewasher is rated in accordanceto the Pressure Washer Manufacture Association (PWMA) standard PW101 (Testing and Rating Performance of PressureWashers).

OWNER'SRESPONSIBILITIES

Followthe hourly or calendar intervals, whichever occurs

first. More frequent service is requiredwhen operating in adverse conditions noted below.

Maintenance Schedule

[i[	i[		i[i[i[[ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [
	•	Changeengine oil
	•	Check/clean water inlet screen1
		Check high pressure hose
	•	Check detergentsiphoning hose
	• Check spray gun and assembly for leaks
	•	Clean debris
	•	Check air filter
	• Check engine oil level
[	[[[	iii	[[[[[[[[

•Cleanair filter'

} }: }: } [ t : ii }f}}: }: }: }: }} } } } } } } } } } } } } } } } } } } } } } }_

•Changeengine oil

•Cleansediment cup

•Check/adjustspark plug

•Servicespark arrester1

•Cleanfuel tank and filter

-- =

•Change pump oil_

):):) ))))):):)):):) ))))))))))))))))))))))))

•Replaceair filters

•Replacespark plug

•Check adjust idle speed'

•Check adjust valve clearance_

[_JJJt[

•Cleancumbustion chamber'

tLtLtLt i_ }[iJ[ 1iLL: J[ [ [[i[[ [ [[[ ij[ [ [j[ [ [iij[ [ Li}iL LJL LLLLL L L L L L L L L L L L

2

3

•Check fuel tube (replace if necessary)'

Clean if clogged. Replace if perforated or torn.

Service more often under dirty or dusty conditions.

Replace paper element only.

4

These items should be serviced by your servicing dealer.

5

Change after first 50 hours of operation and then every 200 hours or 3 mooths, whichever occurs first.

14