Craftsman 580.7523 Unpack the Pressure Washer, Carton Contents, AssembJingYour Pressure Pasher

Unpack the Pressure Washer

1.Remove everything from carton except pressure washer.

2.Opencarton completely by cutting each corner from top to bottom.

3.Remove pressure washer from carton.

Carton Contents

Checkall contents. If any parts are missing or damaged,call the pressurewasherhelplineat 1-888-222-3136.

•The main unit

•Handle

•Spray gun

•High pressure hose

•Nozzleextension with quick connect fitting

•Engineoil

•Parts bag (which includes items listed below)

•Owner'smanual

•Registrationcard

•Bagcontaining 5 multi-colored quick connect spray tips

•HandleFasteningHardwareKit (whichincludes):

•Carriage Bolt (2)

•Plastic Knobs (2)

Becomefamiliar with each piece before assembling the pressure washer. Checkall contents against the illustration on page5. if any parts are missing or damaged,call the pressure washer helpline at 1-888-222-3136.

AssembJingYour Pressure Pasher

Your Craftsman pressure washer will need assembly before operation:

1.Fill out and send in registration card.

2.Attach handle.

3.Add oil to engine crankcase.

4.Add fuel to fuel tank.

6.Connect pressure hose to spray gun and pump.

7.Connect water supply to pump.

8.Attach nozzleextension to spray gun.

9.Select/attach quick connect spray tip to nozzle extension.

Attach HandJe

1.Placehandle (B) onto handle supports (C) connected to main unit. Makesure holes (D) in handlealign with holes (D) on handle supports.

NOTE:it may be necessaryto movethe handlesupports from side to side in order to align the handle so it will slide over the handle supports.

2.Insert carriage bolts (E)through holes from outside of unit and attach a plastic knob (F) from inside of unit. Tighten by hand.

3.Insert multi-colored spray tips in spaces provided in handle.