Zenoah BCZ2600SU, BCZ2600SW manual If Someone Comes, Maintenance, Handling Fuel,  10 

Page 10

5. For safe operation

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the engine before performing any maintenance or checking procedures.

WARNING

The metallic parts reach high temperatures immediately after stopping the engine.

3.When replacing the cutting attachment or any other part, or when replacing the oil or any lubricant, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance.

5.Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for the unit.

6.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly.

HANDLING FUEL

1.The engine of the RedMax product is designed to run on a mixed fuel which contains highly flammable gasoline. Never store cans of fuel or

10

Image 10
Contents BCZ2600SW BCZ2600SUSafety First ContentsSpecifications Parts location 4  Symbols on the machine  5 Working Circumstance For safe operationWorking Condition  6 Working Plan  7 Starting the Engine Before Starting the Engine 8  Using the Product  9 Handling Fuel MaintenanceIf Someone Comes  10 Transportation  11  12  SE7 SE8 SE9 Mounting Engine SE5 SE5SE6 Putting on Waist PADBalance Unit Set upInstalling Cutting Head SE10  14 Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  15 For Your Engine LIFE, Avoid Fueling the Unit 16  Starting Engine OperationOP1 OP4 18  OP7 Adjusting the Line Length 19  MA1 MaintenanceMaintenance Chart  20  21   22  MA8 Procedures to be Performed After Every 100 Hours of USE 23  Storage  24 Optional blade usage  25 BCZ2600SU OPT5 OPT6 OPT3BCZ2600SU OPT4  26 Controlling Blade Bounce OPT7 OPT8Operation  27 What causes kick out  28 Transporting the Unit OPT9 Maintenance Blade 29  Check Probable Causes Action Troubleshooting guide 30  Parts list  31  32  Optional Blade & Accessories  33 Drive Unit BCZ2600SW S/N 300001 and up  34 Optional Blade  35  36  BCZ2600S S/N 50100000 and up BCZ2600SU S/N 50100000 and up  37 Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC