Zenoah BCZ2600SU, BCZ2600SW For safe operation, Working Condition, Working Circumstance,  6 

Page 6

5. For safe operation

1.Read this manual carefully until you completely understand and follow all safety and operating instructions.

2.Keep this manual handy so that you may refer to it later whenever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer from whom you purchased the product.

3.Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of this product.

4.Never allow children or anyone unable to fully understand the directions given in the manual to use the machine.

WORKING CONDITION

1.When using the product, you should wear proper clothing and protective equipment.

(1)Helmet

(2)Ear protectors

(3)Protection goggles or face protector

(4)Thick work gloves

(5)Non-slip-sole work boots

2.And you should carry with you.

(1)Attached tools and files

(2)Properly reserved fuel

(3)Spare blade

(4)Things to notify your working area (rope, warning signs)

(5)Whistle (for collaboration or emergency)

(6)Hatchet or saw (for removal of obstacles)

3.Do not wear loose clothing, jewelry, short trousers, sandals, or go barefoot. Do not wear anything which might be caught by a moving part of the unit. Secure hair so it is above shoulder length.

WORKING CIRCUMSTANCE

1. Never start the engine inside a closed room or building. Exhaust gases contain dangerous carbon monoxide.

2.Never use the product,

a.when the ground is slippery or when you can’t maintain a steady posture.

6

Image 6
Contents BCZ2600SW BCZ2600SUSafety First ContentsSpecifications Parts location 4  Symbols on the machine  5 Working Circumstance For safe operationWorking Condition  6 Working Plan  7 Before Starting the Engine Starting the Engine 8  Using the Product  9 Handling Fuel MaintenanceIf Someone Comes  10 Transportation  11  12  SE7 SE8 SE9 Mounting Engine SE5 SE5SE6 Putting on Waist PADBalance Unit Set upInstalling Cutting Head SE10  14 Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  15 Fueling the Unit For Your Engine LIFE, Avoid 16  Starting Engine OperationOP1 OP4 18  Adjusting the Line Length OP7 19  MA1 MaintenanceMaintenance Chart  20  21   22  Procedures to be Performed After Every 100 Hours of USE MA8 23  Storage  24 Optional blade usage  25 BCZ2600SU OPT5 OPT6 OPT3BCZ2600SU OPT4  26 Controlling Blade Bounce OPT7 OPT8Operation  27 What causes kick out  28 OPT9 Maintenance Blade Transporting the Unit 29  Troubleshooting guide Check Probable Causes Action 30  Parts list  31  32  Optional Blade & Accessories  33 Drive Unit BCZ2600SW S/N 300001 and up  34 Optional Blade  35  36  BCZ2600S S/N 50100000 and up BCZ2600SU S/N 50100000 and up  37 Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC