Zenoah BCZ2600SU, BCZ2600SW manual Safety First, Contents

Page 2

SAFETY FIRST

Instructions contained in warnings within this

manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death.

IMPORTANT

This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

CONTENTS

1.Parts location …………………………………3

2.Specifications …………………………………3

3.Warning labels on the machine ……………4

4.Symbols on the machine ……………………5

5.For safe operation ……………………………6

6.Set up …………………………………………12

7.Fuel……………………………………………15

8.Operation ……………………………………17

9.Maintenance …………………………………20

10.Storage ………………………………………24

11.Optional blade usage ………………………25

12.Troubleshooting guide ………………………30

13.Parts list ………………………………………31

Image 2
Contents BCZ2600SW BCZ2600SUSafety First ContentsSpecifications Parts location 4  Symbols on the machine  5 Working Circumstance For safe operationWorking Condition  6 Working Plan  7  8  Before Starting the EngineStarting the Engine Using the Product  9 Handling Fuel MaintenanceIf Someone Comes  10 Transportation  11  12  SE7 SE8 SE9 Mounting Engine SE5 SE5SE6 Putting on Waist PADBalance Unit Set upInstalling Cutting Head SE10  14 Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  15  16  Fueling the UnitFor Your Engine LIFE, Avoid Starting Engine OperationOP1 OP4 18   19  Adjusting the Line LengthOP7 MA1 MaintenanceMaintenance Chart  20  21   22   23  Procedures to be Performed After Every 100 Hours of USEMA8 Storage  24 Optional blade usage  25 BCZ2600SU OPT5 OPT6 OPT3BCZ2600SU OPT4  26 Controlling Blade Bounce OPT7 OPT8Operation  27 What causes kick out  28  29  OPT9 Maintenance BladeTransporting the Unit  30  Troubleshooting guideCheck Probable Causes Action Parts list  31  32  Optional Blade & Accessories  33 Drive Unit BCZ2600SW S/N 300001 and up  34 Optional Blade  35  36  BCZ2600S S/N 50100000 and up BCZ2600SU S/N 50100000 and up  37 Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC