Zenoah BCZ2600SW, BCZ2600SU manual Transportation,  11 

Page 11

5. For safe operation

refill the tank of the unit in any place where there is a boiler, stove, wood fire, electrical sparks, welding sparks, or any other source of heat or fire which might ignite the fuel.

2.Never smoke while operating the unit or refilling its fuel tank.

3.When refilling the tank, always turn off the engine and allow it to cool down. Take a careful look around to make sure that there are no sparks or open flames anywhere nearby before refueling.

4.Wipe spilled fuel completely using a dry rag if any fuel spillage occurs during refueling.

5.After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to a spot 10feet (3m) or more away from where it was refueled before turning on the engine.

TRANSPORTATION

1.When hand-carrying the product, cover over the cutting part if necessary, lift up the product and carry it paying attention to the blade.

2.Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank during transport.

11

Image 11
Contents BCZ2600SU BCZ2600SWContents Safety FirstParts location Specifications 4   5  Symbols on the machine 6  For safe operationWorking Condition Working Circumstance 7  Working Plan 8  Before Starting the EngineStarting the Engine  9  Using the Product 10  MaintenanceIf Someone Comes Handling Fuel 11  Transportation 12  Putting on Waist PAD SE5SE6 SE7 SE8 SE9 Mounting Engine SE5 14  Set upInstalling Cutting Head SE10 Balance Unit 15  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OIL 16  Fueling the UnitFor Your Engine LIFE, Avoid OP4 OperationOP1 Starting Engine 18   19  Adjusting the Line LengthOP7  20  MaintenanceMaintenance Chart MA1 21   22   23  Procedures to be Performed After Every 100 Hours of USEMA8  24  Storage 25  Optional blade usage 26  OPT3BCZ2600SU OPT4 BCZ2600SU OPT5 OPT6 27  OPT7 OPT8Operation Controlling Blade Bounce 28  What causes kick out 29  OPT9 Maintenance BladeTransporting the Unit  30  Troubleshooting guideCheck Probable Causes Action  31  Parts list 32   33  Optional Blade & Accessories 34  Drive Unit BCZ2600SW S/N 300001 and up 35  Optional Blade 36   37  BCZ2600S S/N 50100000 and up BCZ2600SU S/N 50100000 and upLimited Warranty RedMax Garantie limitée Komatsu Zenoah America INC