11. Optional blade usage
OPT3
BCZ2600S
BCZ2600SU
OPT4
BCZ2600S
BCZ2600SU
OPT5
OPT6
26
IMPORTANT
[ BCZ2600S, BCZ2600SU ]
Change to the debris guard which is suitable for the metal blade. (OPT3)
TIGHTENING TORQUE: 130~174
(1)Guard Ass’y: | (6)Screw: | ||
(2)Guard: | (7)Plate: | ||
(3)Plate Comp.: | (8)Washer: | ||
(4)Plate: | (9)Bolt: | ||
(5)Blade: |
|
|
IMPORTANT
[ BCZ2600S, BCZ2600SU ]
Change the loop handle to the
(1)Bracket:
(2)
■STARTING THE ENGINE
Please refer 5.For safe operation (P.8~9), 8.Operation (P.17).
WARNING
•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OPT5)
■CUTTING METHOD
a)Use the front left side cutting.
b)Guide the blade from your right to left with it tilted slightly to your left. (OPT6)
c)When mowing a wide area, start working from your left end to avoid interference of cut grass.
d)The blade may be seized by weeds if the engine