Zenoah BCZ2600SW, BCZ2600SU manual Working Plan,  7 

Page 7

5. For safe operation

b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be difficult to gain a clear view of the working area.

c. During rain storms, during lightning storms, at times of strong or gale-force winds, or at any other times when weather conditions might make it unsafe to use the product.

WORKING PLAN

1.You should never use the product when under the influence of alcohol, when suffering from exhaustion or lack of sleep, when suffering from drowsiness as a result of having taken cold medicine or at any other time when a possibility exists that your judgment might be impaired or that you might not be able to operate the product properly and in a safe manner.

2.When planning your work schedule, allow plenty of time to rest. Limit the amount of time over which the product is to be used continuously to somewhere around 30~40 minutes per session, and take 10~20 minutes of rest between work sessions. Also try to keep the total amount of work performed in a single day under 2 hours or less.

WARNING

1.If you don’t observe the working time, or working manner (See USING THE

PRODUCT), Repetitive Stress Injury(RSI) could occur.

If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doctor before getting worse.

2.To avoid noise complaints, in general, operate product between 8a.m. and 5p.m. on weekdays and 9a.m. to 5p.m. weekends.

NOTE

Check and follow the local regulations as to sound level and hours of operations for the product.

7

Image 7
Contents BCZ2600SU BCZ2600SWContents Safety FirstParts location Specifications 4   5  Symbols on the machine 6  For safe operationWorking Condition Working Circumstance 7  Working PlanStarting the Engine Before Starting the Engine 8   9  Using the Product 10  MaintenanceIf Someone Comes Handling Fuel 11  Transportation 12  Putting on Waist PAD SE5SE6 SE7 SE8 SE9 Mounting Engine SE5 14  Set upInstalling Cutting Head SE10 Balance Unit 15  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OILFor Your Engine LIFE, Avoid Fueling the Unit 16  OP4 OperationOP1 Starting Engine 18  OP7 Adjusting the Line Length 19   20  MaintenanceMaintenance Chart MA1 21   22  MA8 Procedures to be Performed After Every 100 Hours of USE 23   24  Storage 25  Optional blade usage 26  OPT3BCZ2600SU OPT4 BCZ2600SU OPT5 OPT6 27  OPT7 OPT8Operation Controlling Blade Bounce 28  What causes kick outTransporting the Unit OPT9 Maintenance Blade 29  Check Probable Causes Action Troubleshooting guide 30   31  Parts list 32   33  Optional Blade & Accessories 34  Drive Unit BCZ2600SW S/N 300001 and up 35  Optional Blade 36   37  BCZ2600S S/N 50100000 and up BCZ2600SU S/N 50100000 and upLimited Warranty RedMax Garantie limitée Komatsu Zenoah America INC