Zenoah BCZ2600SW, BCZ2600SU manual Parts list,  31 

Page 31

13. Parts list

BRUSHCUTTERS

BCZ2600S

BCZ2600SU

BCZ2600SW

NOTE :

1.Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement.

2.KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.

3.When placing parts orders for repair and/or replacement, check if the model name and the serial number are applicable to those specified in the parts list, then use parts number described in the parts list.

4.The contents described in the parts list may change due to improvement.

5.The parts for the machine shall be supplied seven (7) years after the machine is discontinued. [It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of seven (7) years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.]

APPLICABLE SERIAL NUMBERS :

 

 

 

Sep. 2003

BCZ2600S

DRIVE UNIT 300001

and up

ENGINE UNIT 50100000

and up

BCZ2600SU

DRIVE UNIT

300001

and up

ENGINE UNIT

50100000

and up

BCZ2600SW

DRIVE UNIT

300001

and up

ENGINE UNIT

50100000

and up

 

 

 

 

 

 

 

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents BCZ2600SU BCZ2600SWContents Safety FirstParts location Specifications 4   5  Symbols on the machine 6  For safe operationWorking Condition Working Circumstance 7  Working PlanStarting the Engine Before Starting the Engine 8   9  Using the Product 10  MaintenanceIf Someone Comes Handling Fuel 11  Transportation 12  Putting on Waist PAD SE5SE6 SE7 SE8 SE9 Mounting Engine SE5 14  Set upInstalling Cutting Head SE10 Balance Unit 15  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OILFor Your Engine LIFE, Avoid Fueling the Unit 16  OP4 OperationOP1 Starting Engine 18  OP7 Adjusting the Line Length 19   20  MaintenanceMaintenance Chart MA1 21   22  MA8 Procedures to be Performed After Every 100 Hours of USE 23   24  Storage 25  Optional blade usage 26  OPT3BCZ2600SU OPT4 BCZ2600SU OPT5 OPT6 27  OPT7 OPT8Operation Controlling Blade Bounce 28  What causes kick outTransporting the Unit OPT9 Maintenance Blade 29  Check Probable Causes Action Troubleshooting guide 30   31  Parts list 32   33  Optional Blade & Accessories 34  Drive Unit BCZ2600SW S/N 300001 and up 35  Optional Blade 36   37  BCZ2600S S/N 50100000 and up BCZ2600SU S/N 50100000 and upLimited Warranty RedMax Garantie limitée Komatsu Zenoah America INC
Top Page Image Contents