Troy-Bilt 12212, 12211 owner manual Owner Registration Card, Warranty Service, Model/Serial Numbers

Page 48

CUSTOMER SERVICE INFORMATION

Owner Registration Card

 

Please fill out and mail the enclosed owner

 

registration card. The purpose of this card is

 

to register each unit at the factory so that we

 

can provide you with warranty benefits and

 

informational bulletins.

I

 

MA L

Warranty Service

The warranty statement is included in the unit’s literature package.

Model/Serial Numbers

A Model/Serial Numbers decal is located on top of the trans- mission. For ready reference, record these numbers in the spaces below.

Model Number:

Serial Number:

Authorized Dealer Information

If you purchased your unit from an authorized dealer, record the dealer’s address and phone number below for ready refer- ence:

Dealer Name:

Address:

Phone:

IMPORTANT:

Left and right sides of the unit are determined by standing behind the unit, in the operator’s position, and facing in the direction of forward travel.

NOTICE:

We reserve the right to change specifications, add

improvements or discontinue the manufacture of any of our equipment without notice or obligation to purchasers of our equipment.

Customer Service and Technical Service

If you have questions or problems with the unit, contact your local dealer or the factory. (When calling or writing, provide the Model/Serial Numbers of the unit.)

Replacement Parts

Factory specified replacement parts are available from your authorized dealer or directly from the factory. When ordering parts, be sure to provide the following:

Model/Serial Numbers of the unit.

Part number of the part needed.

Part Description.

Quantity needed.

NOTE: All replacement parts must conform to our rigid quality specifications. Although some replacement parts we provide may vary slightly in shape, color or texture from the original parts, any variations will not affect the fit or performance of these parts on your unit.

Engine Service and Repair

For engine service or repair, contact your nearest authorized engine dealer (look in the

Yellow Pages under “Engines–Gasoline”). The engine is warranted by the engine man- ufacturer. Any unauthorized work performed on the engine during the warranty period

may void this warranty. For complete details on the engine warranty, refer to the engine owner manual.

WARNING

We urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fit on the unit.

For customer assistance, contact your nearest authorized dealer or:

GARDEN WAY INCORPORATED • 1 Garden Way Troy, New York 12180

Customer Service: 1-800-437-8686 • Technical Service: 1-800-520-5520 • Parts Service: 1-800-648-6776

FAX: (518) 391-7332 • WEBSITE: www.troybilt.com

Outside the United States and Canada:

Customer Service: (518) 391-7007 • Technical Service: (518) 391-7008 • Parts Service: (518) 391-7006 • FAX (518) 391-7332

1905413 Rev. A (2/00)

Printed in U.S.A.

© 2000 Garden Way Incorporated

Image 48
Contents 7HP Pony REAR-TINE Tiller Recoil Start Model shownSee Back Cover for Customer Service information Safety Exercise caution to avoid slipping or fallingKeep children and pets away Use slower engine speedsOperating Symbols To Avoid Serious InjuryIntroduction Inspect unitAttach Handlebars Screw the height adjustment handle Attach Forward Clutch RodAttach Reverse Clutch Control Hairpin CotterReinstall and hand-tighten the oil fill plug N Check Gear Oil Level in TransmissionSelect the proper hole in the clutch If the gap is incorrectAttach Engine Throttle Lever Check Air Pressure in TiresAdd Motor Oil to Engine Attach Wheel Gear LeverBattery Activation and Charging Check Hardware for TightnessAttach Battery Cables and Vent Tube Install BatteryConnect Wiring Harness KeyswitchWheel Gear Lever Forward ClutchTo Operate the Forward Clutch EngageHandlebar Height Adjustment To Adjust the Handlebar HeightReverse Clutch Depth RegulatorElectric Start Keyswitch electric start model Engine Throttle LeverStop on recoil start model only Stop Stops the engine Pre-Start Checklist IntroductionBREAK-IN Operation Starting and Stopping EngineOperating the Tiller Starting the EngineStopping the Engine Stop Stop positionKeyswitch to OFF to stop the engine Turning the Tiller AroundFor forward motion of the wheels and tines For reverse motion of the wheels and tinesLet the tiller do the work Tilling depthsAvoid tilling soggy, wet soil Avoid making footprintsTilling across slopes without using terraces Clearing the tinesTilling on slopes Tilling up and down slopesPower Composting Loading and Unloading TillerRequired Maintenance Schedule ProcedureTiller Lubrication EveryTransmission Gear OIL Service Check HardwareCheck Tire Pressure Check for OIL LeaksEngine Cleaning Engine OIL ServiceAIR Cleaner Service CARBURETOR/GOVERNOR Control AdjustmentsWheel Gear Cable Adjustment OFF Season StorageBolo Tines Reinstall the belt cover and secure it with the two nuts Checking and Adjusting Tension on the Drive BeltsCutting Edge Tine Threads Installing the Forward Drive Belt Forward Drive Belt Removal and InstallationRemoving the Forward Drive Belt Reverse Drive Belt Removal and Installation Removing the Reverse Drive BeltBattery Maintenance Installing the Reverse Drive BeltReconnect the reverse cable wire to the Z-fitting Q, Figure Battery Care in ServiceTiller Weight Transmission Gear OIL SpecificationsTiller Length Tiller WidthTroubleshooting Problem Possible Cause CorrectionModels 12211 HOOD, Bracket and Depth RegulatorPart Description QTYHandlebar Assembly and Control Levers Bellcrank See PgParts List ENGINE, Support BRACKETS, PULLEYS, BELTS, Belt Cover Part Description QTY Forward Idler Assembly 9621 Input Pinion Shaft & Gear Assembly Drive SHAFT, Input Pinion Shaft and Gear AssembliesMain Drive Shaft Wheel SHAFT, Eccentric Shaft and Tiller Shaft Assemblies Bolo TINES, Wheels Two ea. Refs 1733398 Hex Locknut, 3/8-16 1982612HILLER/FURROWER Attachment Electric Start Assembly 96512 Battery, 12 Volt, 9 Amp Incl 9462 ROW Marker Attachment Bumper Attachment1904522001 Models 12211 ROW Marker Attachment & Bumper AttachmentDescription QTY Row Marker AttachmentWarranty Service Replacement PartsEngine Service and Repair Owner Registration Card