Genie Z-34, Z-22N manual Contents, Contact us

Page 2

Operator's Manual	Second Edition • Ninth Printing

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, call Genie Industries.

Contents
	Page
Safety	1
Controls	8
Pre-operation Inspection	10
Maintenance	12
Function Tests	14
Workplace Inspection	19
Operating Instructions	20
Transport & Lifting Instructions	25
Decals	28
Specifications	30

Contact us:

Internet: http://www.genielift.com

e-mail: techpub@genieind.com

Copyright © 1996 by Genie Industries

First Edition: Third Printing, July 1996

Second Edition: Ninth Printing, June 2007

"Genie" and "Z" are registered trademarks of Genie Industries in the U.S.A. and many other countries.

These machines comply with

ANSI/SIA 92.5-1992.

Printed on recycled paper

Printed in U.S.A.

Genie Z-34/22 & Genie Z-34/22N

Part No. 43654

Image 2

Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsMaximum slope rating, stowed position Fall Hazards Collision Hazards Bodily Injury Hazard Component Damage HazardDamaged Machine Hazards Decal LegendExplosion Hazards Battery Safety Burn HazardsComponent Damage Hazards Lifting HazardControls Platform Control PanelGround Control Panel Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceMaintenance Symbols Legend Check the Hydraulic Oil LevelScheduled Maintenance Check the BatteriesTest Emergency Stop Function TestsAt the Ground Controls At the Platform Controls Test Drive and Braking Test Machine FunctionsTest the Steering Test the Drive Enable System Test Limited Drive SpeedMachines without lift/drive select switch Workplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedOperation from Ground Emergency StopAuxiliary Controls To Position PlatformTo Drive Operation from PlatformTo Steer Driving on a slope To determine the slope gradeDriving down a slope Driving Up/Down Slopes Drive/Brake Control TheoryDriving up a slope After Each Use Drive EnableLow Battery Indicator Light Dry Battery Filling Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Free-wheel Configuration for Winching Transport & Lifting InstructionsSecuring the Platform Securing to Truck or Trailer for TransitSecuring the Chassis Lifting Instructions Decals Decal InspectionGround Controls Side Chassis Platform Power Unit Specifications Drive speeds maximumBooms Mph Km/h Raised or extended 40 ft/40 sec 12.2 m/40 sec Genie Scandinavia