Genie Z-34, Z-22N manual Machines without lift/drive select switch, Test Auxiliary Controls

Operator's Manual Second Edition • Ninth Printing

FUNCTION TESTS

Test the Lift/Drive Select Function (CE models)

Machines with lift/drive select switch:

50 Move the lift/drive select switch to the lift position.

51 Press down the foot switch.

52Move the drive control handle off center. Result: No drive functions should operate.

53Activate each boom function toggle switch. Result: All boom functions should operate.

54Move the lift/drive select switch to the drive position.

55Press down the foot switch.

56Activate each boom function toggle switch. Result: No boom functions should operate.

57Move the drive control handle off center.

Result: The drive functions should operate.

Machines without lift/drive select switch:

58 Press down the foot switch.

59Move the drive control handle off center and activate a boom function toggle switch.

Result: No boom functions should operate. The machine will move in the direction indicated on the control panel.

Test Auxiliary Controls

60 Move the lift/drive select switch to the appropriate position (if equipped).

61 Press down the foot switch.

62Simultaneously hold the auxiliary power switch on and activate each function control handle or toggle switch.

Note: To conserve battery power, test each function through a partial cycle.

Result: All boom, steer and drive functions should operate.

18 Genie Z-34/22 & Genie Z-34/22N Part No.43654