Genie DPL-30S, DPL-25S, DPL-35S manual Test Outrigger Interlock

Page 18

Operator’s Manual

Second Edition • First Printing

 

 

 

 

FUNCTION TESTS

Test Outrigger Interlock

17Twist to release the red Emergency Stop button at the platform controls.

18Push and hold the control activate button and rotate the up/down switch in the direction of intended travel.

Result: The up/down function should operate.

19Unscrew one leveling jack until the corresponding interlock display light turns off.

20Push and hold the control activate button and rotate the up/down switch in the direction of intended travel.

Result: The up/down function should not operate.

21Return the leveling jack to the previous setting and check the bubble level.

22Repeat the procedure for each outrigger.

Test Auxiliary Platform Lowering - AC & DC Models

23Raise the platform slightly.

24Disconnect the power source from the machine.

25Turn the key switch to ground control.

26Push in the auxiliary platform lowering button at the ground controls.

Result: The platform should lower.

27 Connect the power source to the machine.

28 Turn the key switch to platform control.

29Raise the platform approximately 6 in / 15 cm.

30Disconnect the power source from the machine.

31Push and hold the control activate button and rotate the up/down switch in the down direction.

Result: The platform should lower.

32 Connect the power source to the machine.

Test Manual Lowering

33Raise the platform slightly.

34Activate the manual lowering lever. Result: The platform should lower.

16

Genie DPL Super Series

Part No. 82799

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessTip-over Hazards Fall Hazards Electrocution Hazards Collision HazardsComponent Damage Hazards Bodily Injury Hazard Improper Use HazardDamaged Machine Hazards Decal LegendBattery and Charger Safety DC Models Burn Hazards Explosion HazardsLifting Hazard Controls Platform ControlsPage Pre-operation Inspection Breather Cap AC & DC ModelsFundamentals Pre-operation Inspection Maintenance Observe and ObeyCheck the Battery DC Models Check the Hydraulic Oil Level AC and DC ModelsScheduled Maintenance Function Tests Function TestsTest Emergency Stop Test Outrigger Interlock Workplace Inspection Workplace InspectionOperating Instructions Setup Emergency StopPlatform Raise and Lower Auxiliary Platform Lowering AC & DC Models Platform Overload Indicator Light if equippedManual Lowering Fall ProtectionBattery and Charger Instructions Observe and Obey To Charge BatteryDry Battery Filling Charging Instructions Transport and Lifting Instructions Loading the Machine With a ForkliftWinching the Machine onto a Flatbed Truck Lifting Instructions Transport and Lifting InstructionsDecals Inspection for Decals with WordsDecals Inspection for Decals with Symbols Decals Specifications Maximum capacityDistributed By

DPL-30S, DPL-25S, DPL-35S specifications

The Genie DPL series of lift platforms includes the DPL-35S, DPL-25S, and DPL-30S models, known for their robust performance, innovative design, and user-friendly features. These machines are ideal for various applications, including maintenance, construction, and warehousing, providing efficient solutions for accessing heights with safety and ease.

The DPL-35S is distinguished by its impressive working height of up to 35 feet, making it suitable for tasks that require extended reach. This model comes equipped with a powerful electric drive system, ensuring smooth operation while minimizing noise levels. Its compact dimensions make it ideal for confined spaces, and the non-marking wheels allow for safe use on sensitive surfaces. The DPL-35S features a comfortable platform with ample space for tools and personnel, enhancing productivity during tasks.

Similarly, the DPL-25S offers a working height of 25 feet, providing an excellent combination of reach and maneuverability. It benefits from a lightweight design, which not only enhances portability but also ensures ease of transportation between job sites. The DPL-25S incorporates advanced safety features, including an automatic leveling system and safety guardrails, promoting secure work environments for operators.

The DPL-30S strikes a balance between the two models, offering a working height of 30 feet. This model is designed with robust materials that ensure reliability and durability even in demanding conditions. The DPL-30S supports various accessories, allowing for customization to meet specific job requirements. Its intuitive control system simplifies operation, making it accessible for both experienced and novice users alike.

All three models in the Genie DPL series utilize cutting-edge technologies that enhance performance and safety. The electric power system provides efficient operation while reducing emissions, contributing to environmentally friendly practices. The user-friendly controls allow for easy maneuverability, enabling operators to focus on their tasks without getting bogged down by complex mechanisms.

In summary, the Genie DPL-35S, DPL-25S, and DPL-30S lift platforms are engineered for versatility, safety, and efficiency in accessing elevated work areas. Their distinctive features, combined with robust technologies, make them essential tools for various industries, facilitating smoother workflows and improved productivity.
Top Page Image Contents