Setup, Emergency Stop, Platform Raise and Lower

Second Edition • First Printing	Operator’s Manual

Setup

1Position the machine directly below the desired work area.

2Connect to an appropriate power source: DC models: Connect the battery pack.

AC models: Connect to a grounded 15A AC power supply. Use a 12 gauge / 3.3 mm² 3-wire grounded extension cord no longer than

50 feet / 13 m.

3Insert the key and turn to platform control.

4Pull out the red Emergency Stop button at the ground controls to the on position. Be sure the power light is on.

5Install the outriggers and adjust the leveling jacks to level the machine. Use the bubble level to be sure the machine is level.

6Be sure that all four interlock display lights at the ground controls are on.

7Pull down on the platform guard rail locking handle and rotate the platform side guard rail to the upright position. Be sure the side guard rail locks in place. Repeat for the other side.

8Pull the ladder lock pins

and rotate the ladder down. Be sure the ladder locks in place.

9Climb the ladder to enter the platform. Close and latch the platform entry gate and the platform end guard rail.

OPERATING INSTRUCTIONS

Emergency Stop

1Push in the red Emergency Stop button at the platform controls or at the ground controls to stop the up function.

Platform Raise and Lower

1Twist to release the red Emergency Stop button.

2Push and hold the control activate button and rotate the up/down switch in the desired direction of travel.

Part No. 82799

Genie DPL Super Series

DPL-30S, DPL-25S, DPL-35S specifications

The Genie DPL series of lift platforms includes the DPL-35S, DPL-25S, and DPL-30S models, known for their robust performance, innovative design, and user-friendly features. These machines are ideal for various applications, including maintenance, construction, and warehousing, providing efficient solutions for accessing heights with safety and ease.

The DPL-35S is distinguished by its impressive working height of up to 35 feet, making it suitable for tasks that require extended reach. This model comes equipped with a powerful electric drive system, ensuring smooth operation while minimizing noise levels. Its compact dimensions make it ideal for confined spaces, and the non-marking wheels allow for safe use on sensitive surfaces. The DPL-35S features a comfortable platform with ample space for tools and personnel, enhancing productivity during tasks.

Similarly, the DPL-25S offers a working height of 25 feet, providing an excellent combination of reach and maneuverability. It benefits from a lightweight design, which not only enhances portability but also ensures ease of transportation between job sites. The DPL-25S incorporates advanced safety features, including an automatic leveling system and safety guardrails, promoting secure work environments for operators.

The DPL-30S strikes a balance between the two models, offering a working height of 30 feet. This model is designed with robust materials that ensure reliability and durability even in demanding conditions. The DPL-30S supports various accessories, allowing for customization to meet specific job requirements. Its intuitive control system simplifies operation, making it accessible for both experienced and novice users alike.

All three models in the Genie DPL series utilize cutting-edge technologies that enhance performance and safety. The electric power system provides efficient operation while reducing emissions, contributing to environmentally friendly practices. The user-friendly controls allow for easy maneuverability, enabling operators to focus on their tasks without getting bogged down by complex mechanisms.

In summary, the Genie DPL-35S, DPL-25S, and DPL-30S lift platforms are engineered for versatility, safety, and efficiency in accessing elevated work areas. Their distinctive features, combined with robust technologies, make them essential tools for various industries, facilitating smoother workflows and improved productivity.