Operator’s Manual | Second Edition • First Printing |
|
|
|
|
SAFETY RULES
Tip-over Hazards
Do not raise the platform unless the base is level, all four outriggers are properly set up and the leveling jacks firmly contact the ground.
Do not move the machine while the platform is raised.
Do not adjust or remove the outriggers while the platform is occupied or raised.
Do not place or attach overhanging loads to any part of this machine.
Do not transport tools and materials unless they are evenly distributed and can be safely handled by person(s) in the platform.
Do not use the machine on a moving or mobile surface or vehicle.
Do not operate the machine in strong or gusty winds. Do not increase the surface area of the platform or the load. Increasing the area exposed to the wind will decrease machine stability.
Occupants, equipment and materials shall not exceed the maximum platform capacity.
Maximum capacity -
Do not raise the platform unless the machine is level. Do not set the machine up on a surface where it cannot be leveled using only the outriggers.
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not push off or pull toward any object outside the platform.
Maximum allowable |
|
|
manual force | 90 lbs | 400 N |
ANSI and CE | 750 lbs | 340 kg |
|
|
|
CSA | 600 lbs | 272 kg |
|
|
|
Maximum occupants |
| 2 |
|
|
|
Maximum capacity - |
|
|
|
|
|
ANSI and CE | 750 lbs | 340 kg |
|
|
|
CSA | 600 lbs | 272 kg |
|
|
|
Maximum occupants |
| 2 |
|
|
|
2 | Genie DPL Super Series | Part No. 82799 |