Operator’s Manual | Second Edition • First Printing |
|
|
|
|
OPERATING INSTRUCTIONS
Manual Lowering
1 Activate the manual lowering lever.
Auxiliary Platform Lowering - AC & DC Models
1Turn the key switch to ground control. Pull out the red Emergency Stop button to the on position.
2Activate the auxiliary platform lowering button at the ground controls.
Platform Overload Indicator Light (if equipped)
Light flashing indicates the platform is overloaded and no functions will operate. An alarm will sound at the platform controls.
The machine must be reset before functions will operate.
To reset the machine:
1Remove load from the platform.
2Push in, then twist to release the red Emergency Stop button at the platform controls.
3Operate the machine. If the load in the platform is below the rated capacity, the machine will operate.
Fall Protection
Personal fall protection equipment (PFPE) is not required when operating this machine. If PFPE is required by job site or employer rules, the following shall apply:
All PFPE must comply with applicable governmental regulations and must be inspected and used in accordance with the manufacturer’s instructions.
After Each Use
1Select a safe storage
2Remove the key to secure from unauthorized use.
3DC models: Recharge the battery.
20 | Genie DPL Super Series | Part No. 82799 |