Second Edition • First Printing | Operator’s Manual |
|
|
|
|
Maximum capacity -
ANSI and CE | 600 lbs | 272 kg |
|
|
|
CSA | 500 lbs | 227 kg |
|
|
|
Maximum occupants |
| 2 |
|
|
|
Do not operate the machine near
Do not alter or disable machine components that in any way affect safety and stability.
Do not replace items critical to stability with items of different weight or specification. Use only Genie authorized replacement parts.
When moving the machine with a forklift or other transport vehicle, the platform should be fully lowered, the guard rails should be down, the machine should be turned off and no personnel shall remain in the platform.
Do not modify or alter an aerial work platform without prior written permission from the manufacturer. Mounting attachments for holding tools or other materials onto the platform, toeboards or guard rail system can increase the weight in the platform and the surface area of the platform or the load.
SAFETY RULES
Fall Hazards
The guard rail system provides fall protection. If occupants of the platform are required to wear personal fall protection equipment (PFPE) due to job site or employer rules, PFPE equipment and its use shall be in accordance with the PFPE manufacturer’s instructions and applicable governmental requirements.
Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.
Do not enter or raise the platform unless the platform side guard rails are locked upright and the platform end guard rail and the platform entry gate are closed and latched.
Do not exit the platform while raised. If a power failure occurs, have ground personnel activate the manual lowering valve.
Keep the platform floor clear of debris.
Part No. 82799 | Genie DPL Super Series | 3 |