Genie DPL-25S Improper Use Hazard, Damaged Machine Hazards, Bodily Injury Hazard, Decal Legend

Page 7

Second Edition • First Printing

Operator’s Manual

 

 

 

 

Improper Use Hazard

Do not leave the machine unattended unless the key is removed to secure from unauthorized use.

Damaged Machine Hazards

Do not use a damaged or malfunctioning machine.

Conduct a thorough pre-operation inspection of the machine and test all functions before each

work shift. Immediately tag and remove from service a damaged or malfunctioning machine.

Be sure all maintenance has been performed as specified in this manual and the Genie DPL Service Manual.

Be sure all decals are in place and legible.

Be sure the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located in the platform.

Bodily Injury Hazard

Do not operate the machine with a hydraulic oil or air leak. An air leak or hydraulic leak can penetrate and/or burn skin.

Improper contact with components under any cover will cause serious injury. Only trained maintenance personnel should access compartments. Access by the operator is only advised when performing a pre-operation inspection. All compartments must remain closed and secured during operation.

SAFETY RULES

Decal Legend

Genie product decals use symbols, color coding and signal words to identify the following:

Safety alert symbol—used to alert personnel to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Red—used to indicate the presence of an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Orange—used to indicate the presence of a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Yellow with safety alert symbol— used to indicate the presence of a potentially hazardous situation which, if not avoided, may cause minor or moderate injury.

Yellow without safety alert symbol—used to indicate the presence of a potentially hazardous situation which, if not avoided, may result in property damage.

Green—used to indicate operation or maintenance information.

Part No. 82799

Genie DPL Super Series

5

Image 7
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety Rules Tip-over Hazards Fall Hazards Collision Hazards Electrocution HazardsComponent Damage Hazards Decal Legend Improper Use HazardDamaged Machine Hazards Bodily Injury HazardExplosion Hazards Battery and Charger Safety DC Models Burn HazardsLifting Hazard Platform Controls ControlsPage Breather Cap AC & DC Models Pre-operation InspectionFundamentals Pre-operation Inspection Observe and Obey MaintenanceCheck the Hydraulic Oil Level AC and DC Models Check the Battery DC ModelsScheduled Maintenance Function Tests Function TestsTest Emergency Stop Test Outrigger Interlock Workplace Inspection Workplace InspectionOperating Instructions Emergency Stop SetupPlatform Raise and Lower Fall Protection Platform Overload Indicator Light if equippedManual Lowering Auxiliary Platform Lowering AC & DC ModelsTo Charge Battery Battery and Charger Instructions Observe and ObeyDry Battery Filling Charging Instructions Loading the Machine With a Forklift Transport and Lifting InstructionsWinching the Machine onto a Flatbed Truck Transport and Lifting Instructions Lifting InstructionsInspection for Decals with Words DecalsDecals Inspection for Decals with Symbols Decals Maximum capacity SpecificationsDistributed By