52
software version this cannot be changed.
If not already entered by your AEG PS service team: Enter your service contact
Screen 3.2:
In this screen you can program the baud rate of communication (port 0 and port 2). The options are the following
•“1200“
•“2400“
•“4800“
•“9600“
•“19200“
You can program the parity communication (port 0 and port 2). The options are the following:
•“NONE“
•“ODD“
•“EVEN“
You can program the number of stop bits communication (port 0 and port 2).
The options are the following:
•“1“
•“2“
You can program the protocol communication (port 0 and port 2). The options are the following:
•“SEC“