76
8.2 Safety Instructions
1. To provide for
•These “Safety Instructions” are associated with the “Operating Manual” regarding the equipment you have purchased. Before proceeding with the
installation or the startup, read the safety instructions carefully. Compliance with the “Safety Instructions” is obligatory, observance of this being the user’s legal responsibility. Follow the steps mentioned in the established order. Retain them for future consultation. The local electrical standards and different restrictions of the end user geographical location may invalidate some of the recommendations given in the manuals. In case of discrepancies, the user must comply with the pertinent local standards. It is possible to come across equipment where the distribution of the connecting terminals and/or commands do not align with the manual’s illustrations. However, the simplicity of operation together with the labeling permits easy understanding.
•It is strictly forbidden to reproduce or to release this information without the written permission from our company.
•Do not install the machine in a corrosive or dusty atmosphere and never out of doors.
•Do not obstruct the ventilation grilles nor introduce objects through these or other openings. Leave a minimum free space of 25 cm around the machine for ventilation and air circulation.
•Locations must be spacious, well ventilated, away from any heat sources and easy to access. In addition to the ventilation space indicated above, there must be an area of 75 cm free all around the equipment to allow access for after sales service personnel.
•Do not place materials on top of the machine or objects which would obstruct view of the synoptic reading.
2. General Safety Instructions
•All equipment connections including those of the control, should be done
without the presence of the mains supply and with the switches turned to the off, position “O”, “Off”, or .
•Special attention should be given to the labeling on the equipment warning about the “Risk of electric shock” and indicators like . Hazardous live parts inside the equipment, do not remove the cover. Servicing should only be carried out by qualified service personnel. For maintenance or repair service, please contact your nearest after sales service from AEG Power Solutions is compulsory