AEG 2.33 2 user manual 5. ‘‘ALARMS level screen menu

Page 56

56

Screen 3.6

Information about the set-point values:

IP.V and OP.V shows the desired values for the input voltage at the rectifier and the output voltage.

In addition, you will see the maximum permissible voltage imbalance at the rectifier and the bypass input, the current at the output and the battery charging current. Furthermore, the current of the battery and the input will be displayed.

6.3.5. ‘‘ALARMS” level (screen menu 4.0)

When “Alarm” appears, in the main menu, you can only see one alarm, but you can enter “Alarm” into the menu’ to check which alarms are in the current unit as in the following:

Screen 4.0 “Alarms

Image 56

Contents Protect 2.33 Contents Operation Maintenance, warranty and service Using this manual IntroductionSymbols and conventions used Safety and instructions For more information and helpQuality and standard guarantee Management declarationStandards Environmental protectionPresentation Views Views of the equipmentNot available for Protect 2.33 No -3 battery cabinet front view with front door closed Corresponding legends for the equipment views LCD Structure Structural schema Operating principleOperation with inverter not active Normal operationOperation with mains failure Operation in manual bypass Parallel operationThere are two operation modes possible Installation Important safety instructionsBattery safety instructions Cabinet access Bypass Input Output Set up and installation Unpacking and content checking Storage Transportation to siteLocation Connection To the mains connection, terminals X1 to Front view for parallel systemPage Connection of the output, terminals X6 to Page Interface relay contacts, connector Connection example between a UPS and two battery cabinetsCOM-interface RS232 and RS485, connector Connector DB9 X31Page EPO terminals Parallel BUS connectionParallel BUS Connection Start up Control before start up Start up procedureOperation Close Battery Switch Complete UPS shutdown LED indications control panel PCTransfer to maintenance bypass Emergency power off EPO operationBypass manual switch Maintenance Principle of operation Transfer to normal operation Close Battery Switch Control panel and display description Control panel partsTouch Screen Basic functions of keyboard from synopticControl panel parts Messages menus and classification in submenus MainMenu structure Screen description Main level screen menu Screen 0.0 Main ScreenUPS status control screen menu MainPage 3. ‘‘MEASURES level screen menu Page Page 4. ‘‘SETTINGS level screen menu Screen 3.0 Settings and its submenusModbus Screen Page Page 5. ‘‘ALARMS level screen menu UPS Rectifier blocks Alarm list displayed in the LCD panel Alarm Page Page Alarm Page Page Page Page Alarm Error in configuration memory 6. ‘‘DATA Logger level screen menu Screen 5.0 Data logger Page Maintenance, warranty and service Basic maintenance guideBattery fuses BatteriesCapacitors Warranty conditionsCooling Fan Annexes Static Bypass Type External battery cabinet Dimensions & Weight External Battery CabinetSafety Instructions To provide forPage Page Page Operating Instructions 8000032013 BAL, EN