Eiki EIP-1500T owner manual Connecting to a Computer

Connecting to a Computer

When connecting a computer, ensure that it is the last device to be turned on after all the connections are made.

Connecting to a computer with DIGITAL RGB output Terminal (DIGITAL)

•Before connecting the cable, switch the digital input type switch to “PC”.

Computer

1

Switch to “PC”

INPUT 5 terminal

DVI output terminal

DVI cable

(commercially available)

3

2

Note

•Select DIGITAL mode when connecting to digital output terminal of the computer. (See page 29.)

•Before switching “Digital input type switch” and connecting, ensure to unplug the power cord of the pro- jector from the AC outlet and turn off the computer to be connected. After making all connections, turn on the projector and then the computer.

“Plug and Play” function

■This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC com- patible computer will communicate their setting requirements, allowing for quick and easy setup.

■Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.

Note

•The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA DDC compatible computer.

26