Eiki EIP-1500T Selecting the Picture Mode, Switching the High Bright- ness / High Contrast Mode

Image Projection

Selecting the Picture Mode

You can select the picture setting (Memory) directly stored in “Picture Mode” on the “Picture” menu.

Press on the remote control.

•Each time the button is pressed while the display is on, the picture mode changes in order of:

Memory OFF Memory 1 Memory 2

Memory 5 Memory 4Memory 3

Note

•This function can also be accessed from the OSD menu (see page 44).

Switching the High Bright- ness / High Contrast Mode

This function controls the quantity of the pro- jected light and the contrast of the image.

Press on the remote control.

•Each time the button is pressed while the display is on, the mode is switched between “HIGH BRIGHTNESS MODE” and “HIGH CONTRAST MODE”.

Note

•This function can also be accessed from the OSD menu (see page 44).

Adjusting the Picture Aspect Ratio

This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose STRETCH, SIDE BAR, SMART STRETCH or CINEMA ZOOM image.

Press on the remote control.

•Each time is pressed, the picture mode changes as shown on the next page.

•To return to the standard image (“STRETCH”), press

while “RESIZE” is displayed on the screen.

•You can also change the picture display mode

by pressing on the projector.

UNDO button

RESIZE button

PICTURE MODE button

IRIS button

RESIZE button

UNDO button

34