Eiki EIP-1500T owner manual Picture Adjustment Picture menu, Adjusting the Image

Picture Adjustment (“Picture” menu)

You can adjust the projector’s picture to your preferences using the “Picture” menu.

Adjusting the Image

Menu operation Page 38

Note

•First select “Memory 1-5” or “Memory OFF” when you want to save the “Picture” menu set- tings. See page 44 for details.

Example: “Picture” menu screen for INPUT 1 mode

Description of Adjustment Items

Selectable items	Press \	Press
Contrast	For less contrast	For more contrast
Bright	For less brightness	For more brightness
Color	For less color intensity	For more color intensity
Tint	For making skin tones purplish	For making skin tones greenish
Sharp	For less sharpness	For more sharpness
Red	For weaker red	For stronger red
Blue	For weaker blue	For stronger blue

Note

•“Color”, “Tint” and “Sharp” do not appear for RGB input in INPUT 5 mode.

•To reset all adjustment items, select “Reset” on the “Picture” menu screen and press .

•“Tint” cannot be used with PAL, SECAM, PAL- M, PAL-N or PAL-60.

•“Color”, “Tint” and “Sharp” cannot be used in the DIGITAL mode.

Adjusting the Color Temperature

This function allows for selecting the desired color temperature. With the lower value selected, the projected image becomes warmer, reddish and incandescent-like while with the higher value, the image becomes cooler, bluish and fluo- rescent-like.

Menu operation Page 40

Example: “Picture” menu screen for INPUT 1 mode

Description of Color Temperature Settings

CLR Temp	Description
5500K	The less the value is set to, the warmer,
6500K	reddish, incandescent-like the image becomes.
7500K
8500K
	The more the value is set to, the cooler,
9300K
10500K	bluish, fluorescent-like the image becomes.

“CLR Temp” is fine adjusted by following the procedure below.

1 Select “CLR Temp” in the “Picture” menu on the menu screen and press .

•A single menu bar of “CLR Temp” is displayed.

2 Press ' or " to fine adjust the color temperature.

•With the lower value selected, the projected image becomes magenta-tinged. With the higher value selected, the projected image becomes green-tinged.

•Pressing \ or changes the value of the color temperature in the sub menu.

Note

•Values on “CLR Temp” are only for general standard purposes.

42