Computer Image Adjustment (“Fine Sync” menu)
Auto Sync Adjustment
Select whether the image is to be synchronized automatically when switching the signal with “ON” or “OFF”.
Menu operation 
Page 40
Example: “Fine Sync” menu screen for INPUT 5 (RGB) mode
Description of Auto Sync Adjustment
Selectable items | Description | |
(ON) | Auto Sync adjustment will occur when | |
the projector is turned on or when the | ||
| ||
| input signals are switched, when | |
| connected to a computer. | |
(OFF) | Auto Sync adjustment is not automati- | |
cally performed. | ||
|
Note
•Auto Sync adjustment is also performed by
pressing 
on the remote control.
•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.
•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 45.)
•“Auto Sync” cannot be used in the DIGITAL mode.
Checking the Input Signal
This function allows you to check the current in- put signal information.
Menu operation 
Page 40
Example: “Fine Sync” menu screen for INPUT 5 (RGB) mode
46