Eiki EIP-1500T owner manual Specifications, PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC

Page 66

Specifications

Product type

DLPTM Projector

Model

EIP-1500T

Video system

PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43

 

DTV 480I/480P/720P/1080I

Display method

Single Panel Digital Micromirror Device (DMD™) by Texas Instruments

DLP panel

Panel size: 0.8"

 

Drive method: Digital Light Processing (DLP™)

 

No. of dots: 921,600 dots (1,280 [H] ⋅ 720 [V])

Lens

1–1.5 ⋅ zoom lens, F2.0–2.5, f=21.3–31.6 mm

Projection lamp

275 W DC lamp

Video input signal

RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 Ω

S-video input signal

terminated

4-pin Mini DIN connector (INPUT 3)

 

Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

C(chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Component input signal RCA Connector

(INPUT 1, 2) Y: 1.0 Vp-p, sync negative, 75 Ω terminated

 

PB (CB): 0.7 Vp-p, 75 Ω terminated

 

PR (CR): 0.7 Vp-p, 75 Ω terminated

Analog RGB/Digital

29-pin DVI-I terminal

(INPUT 5/DIGITAL)

<Digital>

 

 

 

Input impedance

50 Ω

 

Input level

250-1000 mV

 

<Analog>

 

 

 

Input impedance

75 Ω

 

Input level

0.7 Vp-p

 

Y: 1.0 Vp-p, sync negative, 75 Ω terminated

 

PB (CB): 0.7 Vp-p, 75 Ω terminated

 

PR (CR): 0.7 Vp-p, 75 Ω terminated

 

<Synchronization signal>

 

• Separate sync/Composite sync

 

Input level

TTL level

 

Input impedance

1 KΩ

 

• Green on sync

 

 

Input level (Synchronizing input) 0.286 Vp-p

 

Input impedance

75 Ω

Horizontal resolution

720 TV lines (DTV 720P input)

Pixel clock

12–80 MHz

 

 

Vertical frequency

43–75 Hz

 

 

Horizontal frequency

15–70 kHz

 

 

Computer control signal

9-pin D-sub connector (RS-232C Port)

Rated voltage

AC 100–240 V

 

Input current

3.65 A (When using AC 100 V)

Rated frequency

50/60 Hz

 

 

Power consumption

360 W (When using AC 100 V)

Power consumption (standby)

6 W (When using AC 100 V)

Heat dissipation

1,350 BTU/hour

 

Operating temperature

41°F to 95°F (+5°C to +35°C)

Storage temperature

–4°F to 140°F (–20°C to +60°C)

Cabinet

Plastic

 

 

I/R carrier frequency

38 kHz

 

 

Dimensions (approx.)

12 7/32" ⋅ 3 33/64" ⋅ 11 7/64" (310 (W) ⋅ 89 (H) ⋅ 282 (D) mm) (main body only)

 

12 7/32" ⋅ 4 7/64" ⋅ 11 5/16" (310 (W) ⋅ 104 (H) ⋅ 287 (D) mm) (including adjustment foot

 

and projecting parts)

Weight (approx.)

9.3 lbs. (4.2 kg)

 

Replacement parts

Remote control, Power cord for U.S., Canada, etc., Power cord for Europe, except U.K.,

 

Video cable, Lens cap, QUICK GUIDE, Owner’s manual

As a part of policy of continuous improvement, EIKI reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

63

Page 65 Page 67
Image 66
Page 65 Page 67
Contents EIP-1500T Model No. EIP-1500T Serial No Special Note for Users in the U.K Introduction Information Page Contents Accessories Supplied accessoriesOptional accessory Important Safeguards Rest your eyes occasionally Avoid locations with extremes of tem- peratureDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Part Names and Functions ProjectorAbout the Indicators on the Projector Lamp indicatorProjector Rear View Refer to Input Terminals and Connectable Main Equipment onRemote Control Usable Range Using the Remote ControlWhen using the remote control Inserting the BatteriesSetup and Projection Quick StartSelect the Input mode Setting Up the Projector Setting Up the ProjectorWhen using a wide screen Screen Size and Projection DistanceProjecting a Reversed Image Projection from behind the ScreenConnections Input Terminals and Connectable Main EquipmentYou may need other cables or connectors not listed below Samples of Cables for ConnectionConnecting to Video Equipment Connecting to Video Equipment DVI output terminal Supplied Connecting to a Computer ComputerConnecting to a Computer Controlling the Projector by a Computer Plug the supplied power cord into the AC socket Connecting the Power CordTurning the Power Off Put Turning the Projector On/OffSwitching the Input Mode Image ProjectionAdjusting the Focus Adjusting the Projected Image SizeUsing the Adjustment Feet Keystone Correction PressHorizontal Keystone Correction Vertical Keystone Correction Align Adjusting the Picture Aspect Ratio Selecting the Picture ModeSwitching the High Bright- ness / High Contrast Mode Press on the remote controlStretch Side BAR Smart Stretch Cinema Zoom Menu Items Following shows the items that can be set in the projectorOptions menu Example Picture menu screen for Input 1 mode Menu icons Using the Menu ScreenMenu Selections Adjustments Press or \ to display the other menu screensPress or \ to adjust the item se- lected To adjust the projected image while viewing itPress or to select the item you want to adjust Single adjustment itemExample Picture menu screen for Menu Selections SettingsInput 1 mode Example Options menu screenSub menu Adjusting the Color Temperature Picture Adjustment Picture menuAdjusting the Image Press or to fine adjust the color temperaturePress or to fine adjust the gamma correction Gamma Correction FunctionEmphasizing the Contrast Picture Mode Function Switching the High Bright- ness/High Contrast ModeExample Picture menu screen for Input 1 mode Special Modes Setting Computer Image Adjustment Fine Sync menuAdjusting the Computer Image Example Fine Sync menu screen for Input 5 Component modeAuto Sync Adjustment Checking the Input SignalExample Fine Sync menu screen for Input 5 RGB mode Using the Options Menu Setting On-screen DisplayChecking the Lamp Life Status Setting the Video System Signal Type SettingEco Mode Selecting a Background ImageAuto Power Off Function Selecting the Menu Screen PositionSelecting the Menu Color Press \ or to select the Lan- guage menu icon Setting the Projection ModeSelecting the On-screen Display Language Press or to select the desired Language, and then pressCleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Abnormal Regarding the Lamp LampReplacing the Lamp Remove the lamp unit cover Removing and Installing the Lamp UnitDisconnect the power cord AC socketResetting the Lamp Timer DVI Digital Input Connecting Pin AssignmentsDVI-I Input 5 port 29-pin connector DVI Analog RGB Input DVI Analog Component InputPC control RS-232C Specifications and Command SettingsCommands Communication conditionsComputer Compatibility Chart ComputerTroubleshooting InputSpecifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSCDimensions Units inches mmGlossary Index 34,44Memo Deutschland & Österreich CanadaEastern Europe Japan & Worldwide
Top Page Image Contents