Eiki LC-XBM31 Basic Operation, Turning On the Projector, Selected Input Source and Lamp Control

Page 18

Basic Operation

Turning On the Projector

1Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector.

2Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red.

3Press the ON/STAND-BY button on the top control or on the remote control. The POWER indicator lights green and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts.

16

http://www.eiki.com

The preparation display will disappear after 30 seconds.

Selected Input Source and Lamp Control

4After the countdown, the input source that was selected the last time and the lamp control status icon (see page 52) appear on the screen.

5If there is no signal input when start on the projector, or the current signal is missed while operating the projector, the Video/PC selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Point ▲▼ buttons and press the SELECT button. And then follow the input signal guidance window to correct the signal and connection.

If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.

Video

Lamp control status

(See page 52 for Lamp control status.)

Note:

The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector.

Video / PC selection window

Project Viideoo

V

Project Computer

Cancel

Note:

When the Logo select function is set to Off, the logo will not be shown on the screen (p.46).

When Countdown off or Off is selected in the Display function, the preparation display will not be shown on the screen (p.46).

When the Input Search function is set to On 2, the input signal will be searched automatically (p.45).

When Off is selected in the Display function, the Video/PC selection window and the input signal guidance window are not shown on the screen. (p.46)

Input signal guidance window

No signal

Current Input setting:Video

Is signal processed correctly?

Is cable connected properly?

Video / PC selection window

Project Video

Project Computer

Cancel

Input signal guidance window

No signal

Current Input setting:RGB

Is signal processed correctly?

Is cable connected properly?

18

Image 18
Contents Model LC-XBM31 Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Air Circulation Safety InstructionsInstalling the Projector in Proper Position Moving the ProjectorAC Power Cord for the United Kingdom AC Power Cord RequirementAC Power Cord for the United States and Canada ComplianceBack Part Names and FunctionsFront BottomPart Names and Functions Rear Terminal⑤ LAN Connection Terminal Top Control Remote Control Remote Control Code Remote Control Battery InstallationRemote Control Operating Range Menu buttonPositioning the Projector InstallationAdjustable Foot NoteInstallation Connecting to a ComputerCables used for connection Connecting to Video Equipment MICConnecting to Component Video and RGB Scart Equipment Connecting the AC Power Cord Turning On the Projector Input signal guidance windowBasic Operation Selected Input Source and Lamp ControlEnter a PIN code What is PIN code?Basic Operation PIN Code Input Dialog BoxTurning Off the Projector Direct OFF FunctionTop Control How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Auto Setup button Point buttons Zoom and Focus AdjustmentAuto Setup Function Keystone CorrectionSound Adjustment Remote Control Operation No Show button Timer buttonTimer Image buttonInput Source Selection RGB Computer 1/Computer Remote Control Computer 1 buttonComputer Input Computer 2 buttonAuto Computer InputComputer System Selection ModeTo store adjustment parameters Auto PC AdjustmentPC adjust Menu Auto PC adjManual PC Adjustment Reset Mode freeStore Image Mode Selection Image Adjustment Screen Size Adjustment Keystone Digital zoom +Digital zoom CeilingVideo button Video Video button S-video Video InputInput Source Selection Video, S-video VideoInput Menu Video InputInput Source Selection Component, RGB Scart 21-pin Component buttonComponent Auto Video System SelectionVideo or S-video Auto AV System Menu Video or S-video AV System Menu ComponentDynamic Tint Image Adjust MenuColor Blackboard or ColorboardNoise reduction ProgressiveStore Menu Screen Menu Note Keystone Setting Menu SettingSetting LanguageSetting Auto setupDisplay Logo Logo and Logo PIN code lock settingsBackground Logo selectCapture 720p, 1035i,Logo PIN code lock Enter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code lock setting Logo PIN code changeTerminal Direct onShut down Count down 00000-18000 Standby modeStop or Cancel the P-timer via Remote Control At Restart to resume Count up orClosed Caption To change the code for the remote control Code To change the code for the projectorPIN code lock Security Key lock and PIN code lockKey lock Key lockChange the PIN code Change the PIN code lock settingEnter a PIN code Enter a PIN code Change the PIN codeFan Video delay controlLamp counter reset Fan controlFactory default Filter counterOff/2000H/3000H/4000H. Note Remote Control InformationInput Source Information Display Maintenance and Cleaning Projector is shut down and the Warning indicator lights redNote Then check the matters below Filter counter reset Maintenance and CleaningResetting the Filter Counter Replacing the FilterCleaning the Projection Lens Cleaning the Projector CabinetAttaching the Lens Cap Lamp Replacement Reset the lamp counterLamp Handling Precautions Troubleshooting AppendixAppendix Image is distorted or runs off Remote Control doesIndicator blinks or lights PIN code dialog box appearsAppendix Menu Tree Computer Input/Video InputVideo Input Computer InputRed Indicators and Projector ConditionIndicators RedCompatible Computer Specifications DisplayTechnical Specifications Optional Parts AccessoriesSpecifications are subject to change without notice Model NoPJ Link Notice Attaching the Filter Cover to the ProjectorTX + RX + Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Horiz. sync. Input/OutputPIN Code Lock No Logo PIN Code Lock NoPIN Code Number Memo Dimensions Unit mminchKT8BE