Eiki LC-XBM31 owner manual Manual PC Adjustment

Page 30

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

1	Press the MENU button to display the On-Screen	PC adjust Menu
	Menu. Use the Point ▲▼ buttons to select PC
	adjust and then press the Point ► or the SELECT
	button.
2	Use the Point ▲▼ buttons to select the desired
	item and then press the SELECT button to display

the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value.

Fine sync

Use the Point ◄► buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Total dots

Use the Point ◄► buttons to adjust the number of total dots in one horizontal period to match your PC image.

Horizontal

Use the Point ◄► buttons to adjust the horizontal picture position.

Vertical

Use the Point ◄► buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V- sync freq. of the connected computer.

Clamp

Use the Point ◄► buttons to adjust the clamp level.

When the image has dark bars, try this adjustment.

Display area H

Use the Point ◄► buttons to adjust the horizontal area displayed by this projector.

Display area V

Use the Point ◄► buttons to adjust the vertical area displayed by this projector.

30

Image 30

Contents Model LC-XBM31 Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Air Circulation Safety InstructionsInstalling the Projector in Proper Position Moving the ProjectorAC Power Cord for the United Kingdom AC Power Cord RequirementAC Power Cord for the United States and Canada ComplianceBack Part Names and FunctionsFront BottomPart Names and Functions Rear Terminal⑤ LAN Connection Terminal Top Control Remote Control Remote Control Code Remote Control Battery InstallationRemote Control Operating Range Menu buttonPositioning the Projector InstallationAdjustable Foot NoteInstallation Connecting to a ComputerCables used for connection Connecting to Video Equipment MICConnecting to Component Video and RGB Scart Equipment Connecting the AC Power Cord Turning On the Projector Input signal guidance windowBasic Operation Selected Input Source and Lamp ControlEnter a PIN code What is PIN code?Basic Operation PIN Code Input Dialog BoxTurning Off the Projector Direct OFF FunctionTop Control How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Auto Setup button Point buttons Zoom and Focus AdjustmentAuto Setup Function Keystone CorrectionSound Adjustment Remote Control Operation No Show button Timer buttonTimer Image buttonInput Source Selection RGB Computer 1/Computer Remote Control Computer 1 buttonComputer Input Computer 2 buttonAuto Computer InputComputer System Selection ModeTo store adjustment parameters Auto PC AdjustmentPC adjust Menu Auto PC adjManual PC Adjustment Reset Mode freeStore Image Mode Selection Image Adjustment Screen Size Adjustment Keystone Digital zoom +Digital zoom CeilingVideo button Video Video button S-video Video InputInput Source Selection Video, S-video VideoInput Menu Video InputInput Source Selection Component, RGB Scart 21-pin Component buttonComponent Auto Video System SelectionVideo or S-video Auto AV System Menu Video or S-video AV System Menu ComponentDynamic Tint Image Adjust MenuColor Blackboard or ColorboardNoise reduction ProgressiveStore Menu Screen Menu Note Keystone Setting Menu SettingSetting LanguageSetting Auto setupDisplay Logo Logo and Logo PIN code lock settingsBackground Logo selectCapture 720p, 1035i,Logo PIN code lock Enter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code lock setting Logo PIN code changeTerminal Direct onShut down Count down 00000-18000 Standby modeStop or Cancel the P-timer via Remote Control At Restart to resume Count up orClosed Caption To change the code for the remote control Code To change the code for the projectorPIN code lock Security Key lock and PIN code lockKey lock Key lockChange the PIN code Change the PIN code lock settingEnter a PIN code Enter a PIN code Change the PIN codeFan Video delay controlLamp counter reset Fan controlFactory default Filter counterOff/2000H/3000H/4000H. Note Remote Control InformationInput Source Information Display Maintenance and Cleaning Projector is shut down and the Warning indicator lights redNote Then check the matters below Filter counter reset Maintenance and CleaningResetting the Filter Counter Replacing the FilterCleaning the Projection Lens Cleaning the Projector CabinetAttaching the Lens Cap Lamp Replacement Reset the lamp counterLamp Handling Precautions Troubleshooting AppendixAppendix Image is distorted or runs off Remote Control doesIndicator blinks or lights PIN code dialog box appearsAppendix Menu Tree Computer Input/Video InputVideo Input Computer InputRed Indicators and Projector ConditionIndicators RedCompatible Computer Specifications DisplayTechnical Specifications Optional Parts AccessoriesSpecifications are subject to change without notice Model NoPJ Link Notice Attaching the Filter Cover to the ProjectorTX + RX + Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Horiz. sync. Input/OutputPIN Code Lock No Logo PIN Code Lock NoPIN Code Number Memo Dimensions Unit mminchKT8BE