Eiki LC-XBM31 owner manual Turning Off the Projector, Direct OFF Function

Page 20

Basic Operation

Turning Off the Projector

1

Press the ON/STAND-BY button on the top control

or on the remote control, and Power off? appears

 

on the screen.

2

Press the ON/STAND-BY button again to turn off the

projector. The POWER indicator starts to blink red,

 

and the cooling fans keep running. (You can select

 

the level of fans’ quietness and speed. See “Fan” on

 

page 55.) At this time, you can unplug the AC power

 

cord even if the fans are still running.

3

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on

the projector.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF..

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.

Note:

When the Direct on function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.49).

The running speed of cooling fans is changed according to the temperature inside the projector.

Do not put the projector in a case before the projector is cooled enough.

If the WARNING indicator blinks or lights red, see “WARNING indicator” on page 58.

While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.

The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power-off.

Power off? disappears after 4 seconds.

Direct OFF Function

You can disconnect the power cord from the wall outlet or turn off the breaker even during projection without pressing the ON/STAND-BY button.

Note:

When using the Direct OFF function, you can not restart the projector immediately after the power is disconnected. If the external power supply is suddenly cut off, the fans stop immediately. The lamp remains high temperature and needs to be cooled.

20

Image 20
Contents Model LC-XBM31 Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Installing the Projector in Proper PositionAir Circulation Moving the ProjectorAC Power Cord Requirement AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom CompliancePart Names and Functions FrontBack Bottom⑤ LAN Connection Terminal Part Names and FunctionsRear Terminal Top Control Remote Control Remote Control Battery Installation Remote Control Operating RangeRemote Control Code Menu buttonInstallation Adjustable FootPositioning the Projector NoteCables used for connection InstallationConnecting to a Computer Connecting to Video Equipment MICConnecting to Component Video and RGB Scart Equipment Connecting the AC Power Cord Input signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlWhat is PIN code? Basic OperationEnter a PIN code PIN Code Input Dialog BoxTurning Off the Projector Direct OFF FunctionHow to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Zoom and Focus Adjustment Auto Setup FunctionAuto Setup button Point buttons Keystone CorrectionSound Adjustment Remote Control Operation Timer button TimerNo Show button Image buttonRemote Control Computer 1 button Computer InputInput Source Selection RGB Computer 1/Computer Computer 2 buttonComputer Input Computer System SelectionAuto ModeAuto PC Adjustment PC adjust MenuTo store adjustment parameters Auto PC adjManual PC Adjustment Store ResetMode free Image Mode Selection Image Adjustment Screen Size Adjustment Digital zoom + Digital zoomKeystone CeilingVideo Input Input Source Selection Video, S-videoVideo button Video Video button S-video VideoVideo Input Input Source Selection Component, RGB Scart 21-pinInput Menu Component buttonVideo System Selection Video or S-video AutoComponent Auto AV System Menu Video or S-video AV System Menu ComponentDynamic Image Adjust Menu ColorTint Blackboard or ColorboardStore Menu Noise reductionProgressive Screen Menu Note Keystone Setting SettingSetting Menu LanguageSetting Auto setupLogo Logo and Logo PIN code lock settings BackgroundDisplay Logo selectLogo PIN code lock Capture720p, 1035i, Change the Logo PIN code lock setting Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code changeShut down TerminalDirect on Standby mode Stop or Cancel the P-timer via Remote ControlCount down 00000-18000 At Restart to resume Count up orClosed Caption To change the code for the remote control Code To change the code for the projectorSecurity Key lock and PIN code lock Key lockPIN code lock Key lockChange the PIN code lock setting Enter a PIN codeChange the PIN code Enter a PIN code Change the PIN codeVideo delay control Lamp counter resetFan Fan controlOff/2000H/3000H/4000H. Note Factory defaultFilter counter Input Source Information Display Remote ControlInformation Note Then check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Maintenance and Cleaning Resetting the Filter CounterFilter counter reset Replacing the FilterAttaching the Lens Cap Cleaning the Projection LensCleaning the Projector Cabinet Lamp Replacement Reset the lamp counterLamp Handling Precautions Troubleshooting AppendixAppendix Remote Control does Indicator blinks or lightsImage is distorted or runs off PIN code dialog box appearsAppendix Menu Tree Computer Input/Video InputVideo Input Computer InputIndicators and Projector Condition IndicatorsRed RedCompatible Computer Specifications DisplayTechnical Specifications Accessories Specifications are subject to change without noticeOptional Parts Model NoPJ Link Notice Attaching the Filter Cover to the ProjectorConfigurations of Terminals Terminal Analog RGB Mini D-sub 15 pinTX + RX + Horiz. sync. Input/OutputPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Unit mminchKT8BE