Eiki LC-XBM31 owner manual Technical Specifications

Page 71

Appendix

Technical Specifications

Mechanical Information

 

Projector Type

Multi-media Projector

Dimensions (W x H x D)

13.13" x 3.98" x 9.72" (333.5mm x 101.0mm x 247.0mm)

 

(Not including protrusions)

Net Weight

6.4 lbs (2.9 kg)

Foot Adjustment

0˚ to 10˚

Panel Resolution

 

LCD Panel System

0.63" TFT Active Matrix type, 3 panels

Panel Resolution

1,024 x 768 dots

Number of Pixels

2,359,296 (1,024 x 768 x 3 panels)

Signal Compatibility

 

Color System

PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N

SD/HD TV Signal

480i, 480p, 575i, 575p, 720p, 1035i, and 1080i

Input Scanning Frequency

H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz

Optical Information

 

Projection Image Size (Diagonal)

Adjustable from 40” to 300”

Throw Distance

3.6' - 34.4' (1.1m - 10.5m)

Projection Lens

F 2.0 ~ 2.15 lens with f 18.38 mm ~ 22.06 mm

 

with manual zoom and focus

Projection Lamp

215 W

Interface

 

Video Input Jack

RCA Type x 1

Audio Input Jack

RCA Type x 2

Computer In 1/S-video In/Component In

Mini Jack (stereo) x 1

/Computer In 2/Monitor Out/MIC Audio Input Jack

Computer In 1/S-video In

Mini D-sub 15 pin x 1

/Component Input Jack

 

Computer In 2 / Monitor Out Terminal

Mini D-sub 15 pin x 1

Control port

D-sub 9 pin x 1

Audio Output Jack

Mini Jack (stereo) x 1 (variable)

LAN Connection Terminal

RJ45

Audio

 

Internal Audio Amp

10 W RMS

Built-in Speaker

1 speaker, ø1.6" (40mm)

Power

 

Voltage and Power Consumption

AC 100–120 V (3.6A Max. Ampere),

 

50/60 Hz (The U.S.A and Canada)

 

AC 100–240 V (3.6A -2.0A Max. Ampere),

 

50/60 Hz (For other countries)

Operating Environment

 

Operating Temperature

41˚F–95˚F (5 ˚C–35 ˚C)

Storage Temperature

14˚F–140˚F (-10˚C–60 ˚C)

Remote Control

 

Battery

AAA or LR03 1.5V ALKALINE TYPE x 

Operating Range

16.4'�� (5 m)/±��30˚

Dimensions

2.0" (W) x 0.7" (H) x 4.3" (D)

 

(52 mm x 18 mm x 110 mm)

Net Weight

2.37 oz (67 g) (including batteries)

71

Image 71
Contents Network Supported Model LC-XBM31Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety InstructionsInstalling the Projector in Proper Position Air CirculationCompliance AC Power Cord RequirementAC Power Cord for the United States and Canada AC Power Cord for the United KingdomBottom Part Names and FunctionsFront Back⑤ LAN Connection Terminal Part Names and FunctionsRear Terminal Top Control Remote Control Menu button Remote Control Battery InstallationRemote Control Operating Range Remote Control CodeNote InstallationAdjustable Foot Positioning the ProjectorCables used for connection InstallationConnecting to a Computer MIC Connecting to Video EquipmentConnecting to Component Video and RGB Scart Equipment Connecting the AC Power Cord Selected Input Source and Lamp Control Input signal guidance windowBasic Operation Turning On the ProjectorPIN Code Input Dialog Box What is PIN code?Basic Operation Enter a PIN codeDirect OFF Function Turning Off the ProjectorOn-Screen Menu How to Operate the On-Screen MenuRemote Control Top ControlMenu Bar Keystone Correction Zoom and Focus AdjustmentAuto Setup Function Auto Setup button Point buttonsSound Adjustment Remote Control Operation Image button Timer buttonTimer No Show buttonComputer 2 button Remote Control Computer 1 buttonComputer Input Input Source Selection RGB Computer 1/ComputerMode Computer InputComputer System Selection AutoAuto PC adj Auto PC AdjustmentPC adjust Menu To store adjustment parametersManual PC Adjustment Store ResetMode free Image Mode Selection Image Adjustment Screen Size Adjustment Ceiling Digital zoom +Digital zoom KeystoneVideo Video InputInput Source Selection Video, S-video Video button Video Video button S-videoComponent button Video InputInput Source Selection Component, RGB Scart 21-pin Input MenuAV System Menu Video or S-video AV System Menu Component Video System SelectionVideo or S-video Auto Component AutoDynamic Blackboard or Colorboard Image Adjust MenuColor TintStore Menu Noise reductionProgressive Screen Menu Note Keystone Language SettingSetting Setting MenuAuto setup SettingLogo select Logo Logo and Logo PIN code lock settingsBackground DisplayLogo PIN code lock Capture720p, 1035i, Logo PIN code change Change the Logo PIN code lock settingChange the Logo PIN code lock setting Enter a Logo PIN codeShut down TerminalDirect on At Restart to resume Count up or Standby modeStop or Cancel the P-timer via Remote Control Count down 00000-18000Closed Caption Code To change the code for the projector To change the code for the remote controlKey lock Security Key lock and PIN code lockKey lock PIN code lockEnter a PIN code Change the PIN code Change the PIN code lock settingEnter a PIN code Change the PIN codeFan control Video delay controlLamp counter reset FanOff/2000H/3000H/4000H. Note Factory defaultFilter counter Input Source Information Display Remote ControlInformation Note Then check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Replacing the Filter Maintenance and CleaningResetting the Filter Counter Filter counter resetAttaching the Lens Cap Cleaning the Projection LensCleaning the Projector Cabinet Reset the lamp counter Lamp ReplacementLamp Handling Precautions Appendix TroubleshootingAppendix PIN code dialog box appears Remote Control doesIndicator blinks or lights Image is distorted or runs offAppendix Computer Input/Video Input Menu TreeComputer Input Video InputRed Indicators and Projector ConditionIndicators RedDisplay Compatible Computer SpecificationsTechnical Specifications Model No AccessoriesSpecifications are subject to change without notice Optional PartsAttaching the Filter Cover to the Projector PJ Link NoticeHoriz. sync. Input/Output Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin TX + RX +PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Unit mminch DimensionsKT8BE