Eiki LC-XD25 Basic Operation, Turning On the Projector, Selected Input Source and Lamp Mode

Page 18

Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer,

 

VCR, etc.) before turning on the projector.

2

Connect the projector’s AC power cord into an AC

 

outlet. The POWER indicator becomes red. Open the

 

lens cover.

3

Press the POWER ON/STAND-BY button on the

 

top control or on the remote control. The POWER

 

indicator becomes green and the cooling fans start

 

to operate. The preparation display appears on the

 

screen and the count down starts.

4

After the countdown, the input source that was

 

selected the last time and the Lamp mode status icon

 

(see page 52) appears on the screen.

5

If there is no signal input when start on the projector,

 

or the current signal is missed while operating the

projector, the Video/PC selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Point ed buttons

and press the SELECT button. And then follow the input signal guidance window to correct the signal and

connection.

If the projector is locked with a PIN code, PIN code Input Dialog Box appears. Enter the PIN code as instructed on the next page.

Notes:

When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.46)

When the Logo select function is off, the logo is not shown on the screen. (p.48)

When the "Countdown off" or "Off" is selected in the Display function, the countdown is not shown on the screen. (p.47)

During the countdown period, all operations are invalid.

When the "Off" is selected in the Display function, the Video/PC selection window and the input signal guidance window are not shown on the screen. (p.47)

16

The preparation display disappears after 30 seconds.

Selected Input Source and Lamp Mode

Lamp mode

(See page 52 for Lamp mode.)

Video / PC selection window

Input signal guidance window

No signal

Current Input setting:Video

Is signal processed correctly?

Is cable connected properly?

Video / PC selection window

Input signal guidance window

No signal

Current Input setting:RGB

Is signal processed correctly?

Is cable connected properly?

18

Image 18
Contents Model LC-XD25 Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Installing the Projector in Proper Position Air CirculationMoving the Projector Compliance Federal Communications Commission NoticeBack Bottom Part Names and FunctionsFront Air Intake Vent front and bottomRear Terminal Top Control Remote Control Remote Control Battery Installation Operating RangeTwo AA size batteries Installation Adjustable FootPositioning the Projector Using the ferrite core Connecting the AC Power CordProjector side Connecting to a Computer Cables used for connectionConnecting to Video Equipment Connecting to Component Video and RGB Scart Equipment Basic Operation Selected Input Source and Lamp ModeVideo / PC selection window Input signal guidance window Turning On the ProjectorBasic Operation PIN Code Input Dialog BoxTurning Off the Projector Top Control How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Zoom and Focus Adjustment Auto setup functionKeystone Correction Sound Adjustment Remote Control OperationZoom buttons Timer buttonAuto PC button Keystone buttonDirect Operation Computer InputInput Source Selection Source Select MenuComputer System Selection PC System MenuSelecting Computer System Manually Auto PC Adjustment To store adjustment parametersMenu Operation Auto PC Adj Manual PC Adjustment To clear adjusted data ResetMode free To store adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment Screen Size Adjustment NormalTrue Wide FullCustom Digital zoom For zooming in and out the imagesDigital zoom + Zoom buttonVideo Input Input Source Selection VideoVideo button Input Source Selection S-video, Component, RGB Scart 21-pin Video Component RGB ScartAV System Menu Video or S-video Video System SelectionAuto AV System Menu ComponentCinema User preset image in the Image Adjust Menu. p.43 Color TintNoise reduction ProgressiveProvide the image at a normal video aspect ratio Setting Menu Language SettingSetting LanguageAuto setup Input searchAuto Keystone Keystone Blue backDisplay Capture Logo Logo and Logo PIN code lock settingsLogo select Logo select CaptureLogo PIN code lock Logo PIN code lock Logo PIN code lock Dialog BoxRear Standby modeCeiling TerminalOn start Remote control Security Key lock and PIN code lock settings Key lockPIN code lock Change the PIN code lock setting Enter a PIN codeChange the PIN code Fan Fan controlFactory default Closed Caption Factory defaultLamp counter Then check the matters below Maintenance and CleaningIndicator emits a red light Projector is shut down and the WarningCleaning the Air Filter Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Order Replacement Lamp Reset the lamp replacement counterLamp Handling Precautions Resetting the Lamp CounterTroubleshooting AppendixPower management function can not work while Freeze or No Show function is running. see pages 24Exclamation mark appears Remote Control does not workIndicator blinks or lights On the screen Top Control does not workInput PC AdjustMenu Tree SoundImage Select Image Adjust System Image SelectScreen Setting Indicators and Projector Condition Indicators Projector ConditionCompatible Computer Specifications FreqTechnical Specifications Accessories Optional PartsModel No Service Port Connector Terminal Mini DIN 8-PIN Configurations of TerminalsDimensions SerialLogo PIN Code Lock No PIN Code Number MemoEiki International, Inc