Eiki LC-XD25 owner manual Zoom and Focus Adjustment, Auto setup function, Keystone Correction

Page 23

Basic Operation

Zoom and Focus Adjustment

Rotate the Zoom Lever to zoom in and out.

Rotate the Focus Lever to adjust the projected picture focus.

Auto setup function

Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu by just pressing the AUTO SETUP button on the top control. Refer to page 46 for the setting of the Auto setup function.

Keystone Correction

If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control, correct the image manually as follows:

Press the KEYSTONE button on the remote control. The keystone dialog box appears.

Correct keystone distortion by pressing the Point ed buttons. Keystone adjustment can be memorized. (p.47)

Reduce the upper width

Reduce the lower width

with Point e button.

with Point d button.

Focus Lever

Zoom Lever

(Front)

(Rear)

Top Control

AUTO SETUP button

The arrows are white when there is no correction.

The direction of the arrow being corrected turns red.

The arrows disappear at the maximum correction.

If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment is canceled.

The adjustable range is limited depending on the input signal.

Top Control

POINT ed buttons

Remote Control

KEYSTONE button

POINT ed buttons

23

Image 23
Contents Model LC-XD25 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerSafety Instructions Moving the Projector Installing the Projector in Proper PositionAir Circulation Federal Communications Commission Notice ComplianceAir Intake Vent front and bottom Part Names and FunctionsFront Back BottomRear Terminal Top Control Remote Control Two AA size batteries Remote Control Battery InstallationOperating Range Positioning the Projector InstallationAdjustable Foot Projector side Using the ferrite coreConnecting the AC Power Cord Cables used for connection Connecting to a ComputerConnecting to Video Equipment Connecting to Component Video and RGB Scart Equipment Turning On the Projector Selected Input Source and Lamp ModeVideo / PC selection window Input signal guidance window Basic OperationPIN Code Input Dialog Box Basic OperationTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Top ControlMenu Bar Keystone Correction Zoom and Focus AdjustmentAuto setup function Remote Control Operation Sound AdjustmentKeystone button Timer buttonAuto PC button Zoom buttonsSource Select Menu Computer InputInput Source Selection Direct OperationSelecting Computer System Manually Computer System SelectionPC System Menu Menu Operation Auto PC Adj Auto PC AdjustmentTo store adjustment parameters Manual PC Adjustment To store adjusted data ResetMode free To clear adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment True Screen Size AdjustmentNormal Custom WideFull Zoom button For zooming in and out the imagesDigital zoom + Digital zoomVideo button Video InputInput Source Selection Video Video Component RGB Scart Input Source Selection S-video, Component, RGB Scart 21-pinAV System Menu Component Video System SelectionAuto AV System Menu Video or S-videoCinema User preset image in the Image Adjust Menu. p.43 Tint ColorProgressive Noise reductionProvide the image at a normal video aspect ratio Language SettingSetting Setting Menu LanguageAuto Keystone Auto setupInput search Display KeystoneBlue back Logo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureLogo PIN code lock Logo PIN code lock Dialog Box Logo PIN code lockTerminal Standby modeCeiling RearOn start Remote control PIN code lock Security Key lock and PIN code lock settingsKey lock Change the PIN code Change the PIN code lock settingEnter a PIN code Fan control FanLamp counter Factory defaultClosed Caption Factory default Projector is shut down and the Warning Maintenance and CleaningIndicator emits a red light Then check the matters belowAttaching the Lens Cover Cleaning the Air FilterCleaning the Projector Cabinet Cleaning the Projection LensLamp Replacement Reset the lamp replacement counter Order Replacement LampResetting the Lamp Counter Lamp Handling PrecautionsAppendix TroubleshootingShow function is running. see pages 24 Power management function can not work while Freeze or NoOn the screen Top Control does not work Remote Control does not workIndicator blinks or lights Exclamation mark appearsSound PC AdjustMenu Tree InputScreen Image Select Image AdjustSystem Image Select Setting Indicators Projector Condition Indicators and Projector ConditionFreq Compatible Computer SpecificationsTechnical Specifications Model No AccessoriesOptional Parts Serial Configurations of TerminalsDimensions Service Port Connector Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoEiki International, Inc