Eiki LC-XD25 owner manual Fan control

Setting

Fan

This function provides the following alternatives in the cooling fans' operation after turning off the projector. (p.20)

L1	normal operation
L2	slower and lower-sound than the normal
	operation (L1), but it takes longer to cool the
	projector down.

✔Note:

Setting “Fan control” to On1 or On2 affects L2 operation in “Fan.”

Fan control Fan control

This projector provides Fan control function in the Setting menu.

Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector.

Off	Normal speed. Set this function to “Off” when
	using the projector in non-high altitude
	environment.
On 1	Faster than Off mode. Select this mode
	when using the projector in high altitudes
	(about 1,200 meters or more above the sea
	level) where the fans have less cooling
	effect.
On 2	Faster than On 1 mode. Select this mode
	when using the projector in higher altitudes
	than above where the fans have lesser
	cooling effect.

✔Note:

•The fan noise becomes louder in On 1 and On2.

•Failure to set the running speed of cooling fans properly may affect the projector life.

55