Eiki LC-XD25 Computer Input, Input Source Selection, Direct Operation, Source Select Menu

Computer Input

Input Source Selection

Direct Operation

Choose either RGB or Computer 2 by pressing the COMPUTER button on the remote control. Before using COMPUTER button, correct input source should be selected through Menu operation as described below.

Menu Operation

1 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon.

2	Press the Point ed buttons to move the red arrow
	pointer to either Computer 1 or Computer 2, and then
	press the SELECT button.
3	After the Source Select Menu appeared for Computer
	1, move the pointer to RGB and then press the

SELECT button.

✔Notes:

•When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.46)

•Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is set as Monitor out. (p.50)

•Computer 2 (COMPUTER IN 2 / MONITOR OUT) can accept only RGB signal.

Remote Control

COMPUTER button

COMPUTER button

RGB

Computer 2 ✳

✳See Notes at the bottom of this page.

Input Menu Input Menu icon

Move the pointer (red arrow) to Computer 1 and press the SELECT button.

Computer

1

Source Select Menu

Move the pointer to RGB and press the SELECT button.

Input Menu

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

26