Intel MGM45WU manual Attaching the C-plate to the D-tray

Installing and Replacing Mobile Board Components

Attaching the C-plate to the D-tray

To complete the installation of the Mobile Board, attach the C-plate to the D-tray. See Figure 15 and follow these steps:

1.Turn the C-plate (Figure 15, A) over so the top side is facing up as shown in the figure and place it on the matching standoffs in the D-tray (Figure 15, B).

2.Partially secure the C-plate with an M2.5X6 screw (Figure 15, C).

3.Turn the C-plate/D-tray over and secure it with 11 M2.5X6 screws (Figure 15, D) at the locations indicated in the figure.

Figure 15. Attaching the C-plate to the D-tray

45