Intel MGM45WU manual Installing the Keyboard Cover, Installing a Keyboard Cover

Installing and Replacing Mobile Board Components

Installing the Keyboard Cover

To install the keyboard cover (Figure 23, A), see Figure 23 and follow these steps:

1.Observe the precautions in "Before You Begin" on page 35.

2.Insert the two tabs (Figure 23, B) on the front edge of the keyboard cover into the corresponding slots (Figure 23, C) in the C-tray (make sure that the keyboard is attached under the keyboard cover) and rotate the cover downward until it snaps into place.

3.Close the lid and turn the chassis over. Secure the keyboard cover with two screws (Figure 23, D) through the battery bracket as shown in the figure.

Figure 23. Installing a Keyboard Cover

55