Dual-Core Intel Xeon processor LV / E7520 Chipset / 6300ESB ICH
Figure 14. DDR2-400 Memory—DIMM Ordering
3.3.6Intel® 82802AC Firmware Hub (FWH)
A socketed FLASH device is used to store system BIOS as well as an Intel® Random Number Generator (RNG). A bootblock locking jumper is provided to allow a mechanical means of protecting the bootblock BIOS firmware. All BIOS programming is controlled via software.
FWH Features:
•32-pin PLCC package
•Symmetrically-blocked flash memory array (64 Kbyte)
•Pin and register-based block locking
•Integrated hardware RNG
•Single-byte read/write
•Five GPIs
3.3.7Boot ROM
The system boot ROM is installed on the Intel 82802AC FWH device. The FWH is addressable on the LPC bus off the Intel® 6300ESB ICH.
3.3.8In-Target Probe (ITP)
The evaluation board contains an in-target probe (ITP) connector for an ITP-XDP connector. You must use an ITPFlex specific to the Dual-Core Intel Xeon processor LV. Other ITPs will not work and if installed, could damage the platform and/or the ITP. Figure 15 shows the ITP connector which is located between the DIMM B4 connector and the edge of the board. For more information refer to ITP700 Debug Port Design Guide (http://www.intel.com/design/Xeon/guides/249679.htm).
| Dual-Core Intel® Xeon® processor LV with Intel® E7520 Chipset and Intel® 6300ESB ICH |
April 2007 | User’s Manual |
Order Number: 311274-009 | 29 |
