Nikon LS-2000 manual Setup

Page 17

3. Setup

When installing the scanner on its side

Step 2—Remove the transport locking screws

Once the scanner is installed, slide the front cover open. Using a coin, remove the transport locking screws from the adapter slot and side panel and screw them into the holes provided on the rear panel. The adapter slot contains a guard to prevent the transport screw from falling into the scan mechanism when the transport screw is removed. After removing the transport screw from the adapter slot and screwing it into one of the holes on the rear of the scanner, remove the guard and store it in a safe place.

✔Caution: Never turn the scanner on with the locking screws in place. Turning the power on in these circumstances could damage the scanner.

Note: Replace the locking screws and guard when transporting the scanner (see the “ LS-2000 Reference Manual”).

Nikon LS-2000 35 mm Film Scanner User’s Guide

7

Image 17

Contents Page Page Users Guide LS-2000Trademark Information SymbolIii Keep clean Safety PrecautionsDo not disassemble Do not modifyDo not place foreign objects inside the scanner When not using for an extended periodWhen performing routine maintenance When transporting the scanner Vii Contents Overview Overview What’s in the Box Parts and AccessoriesParts of the LS-2000 Choose a location for the scanner SetupSetting up the LS-2000 When installing the scanner on its base Setup Safety Precautions Connect the power cableDo not connect or disconnect the cable while the power is on Connect the Scsi cable When the scanner is the last device in the chain When the scanner is between other devices Scsi connection checklist Set the scanner’s Scsi ID 0 0 9 8MADE in Japanscsi NB Terminator OFF Macintosh Software InstallationReview the system requirements Windows Install Adobe Acrobat ReaderInstall Nikon Scan From disk provided by hardware Setup Start Nikon Scan ScanningTurn on your computer Insert an adapter in the scanner Inserting the SA-20 Strip Film Insert film Choose a color space Choose a film typePerform a preview scan Choose a thumbnail SA-20Select a crop Auto contrast adjustmentRemove dust and scratches Adjust color balance, contrast, and brightnessScan additional images Scan the selected cropScanning Menus, Tabs, and Information Displays Appendix Nikon Scan ControlsButtons Scanner Extras Drawer Control DrawersScan-Size Drawer Color-Balance Drawer Curves-and-Levels DrawerColor management PreferencesEC Declaration of Conformity Declaración DE Conformidad DE LA CEE