Nikon LS-2000 manual Scsi connection checklist, Safety Precautions

Page 23

3. Setup

✔SCSI connection checklist

• Turn off the computer, the LS-2000, and all SCSI devices before connecting the scanner.

•Be sure that the devices at both ends of the SCSI chain are terminated. If the host computer is a Macintosh, the chain will already be terminated at the computer end. In the case of IBM PC/AT compatibles in a chain which contains external devices only, the chain should be terminated at the SCSI board. In the case of a chain which includes internal devices, you may need to remove termination from the board and terminate the last internal device.

•The maximum number of SCSI devices that can be connected in a single chain is eight, including the computer and any internal SCSI devices such as hard disks or CD-ROM drives.

•The total length of cabling in the SCSI chain should be no more than six meters (twenty feet). The longer the cabling, the less reliable the connection.

Safety Precautions

•Do not damage the SCSI cabling’s protective insulation. Do not forcibly tug or bend SCSI cables, place cables under heavy objects or expose them to heat or flame. When disconnecting cables, handle the cable by the connector, not by the cable itself. Should the insulation be damaged or the internal wiring exposed, replace the cable immediately.

•Do not handle SCSI cables or devices when your hands are wet.

Nikon LS-2000 35 mm Film Scanner User’s Guide

13

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Page Page Users Guide LS-2000Trademark Information SymbolIii Do not modify Safety PrecautionsKeep clean Do not disassembleDo not place foreign objects inside the scanner When not using for an extended periodWhen performing routine maintenance When transporting the scanner Vii Contents Overview Overview What’s in the Box Parts and AccessoriesParts of the LS-2000 Choose a location for the scanner SetupSetting up the LS-2000 When installing the scanner on its base Setup Safety Precautions Connect the power cableDo not connect or disconnect the cable while the power is on Connect the Scsi cable When the scanner is the last device in the chain When the scanner is between other devices Scsi connection checklist Set the scanner’s Scsi ID 0 0 9 8MADE in Japanscsi NB Terminator OFF Macintosh Software InstallationReview the system requirements Windows Install Adobe Acrobat ReaderInstall Nikon Scan From disk provided by hardware Setup Start Nikon Scan ScanningTurn on your computer Insert an adapter in the scanner Inserting the SA-20 Strip Film Insert film Choose a color space Choose a film typePerform a preview scan Choose a thumbnail SA-20Select a crop Auto contrast adjustmentRemove dust and scratches Adjust color balance, contrast, and brightnessScan additional images Scan the selected cropScanning Menus, Tabs, and Information Displays Appendix Nikon Scan ControlsButtons Scanner Extras Drawer Control DrawersScan-Size Drawer Color-Balance Drawer Curves-and-Levels DrawerColor management PreferencesEC Declaration of Conformity Declaración DE Conformidad DE LA CEE
Top Page Image Contents